FC-202P1K5T2131F0654 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K5T2131F0654 is a 2.0 HP drive from the VLT FC 202 AQUA Drives series designed for three phase power with a power rating of 1.5 kW and an efficiency of 0.96. It handles a continuous output current of 7.5 A and operates with a mains voltage of 200 to 240 VAC. The drive includes two digital or pulse outputs and one programmable analog output, supporting unshielded motor cables up to 300 meters.
Internal Product Review
The FC-202P1K5T2131F0654 is a Danfoss VLT FC 202 AQUA drive rated for 1.5 kW and 200 - 240 VAC input. Three-phase power support and 0.96 efficiency give the drive strong energy performance for pump and water handling duty. Shielded motor cable capacity up to 150 m makes the drive especially well suited for flexible panel-to-motor layouts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K5T2131F0654 is an AC variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. As a dedicated pump and fan controller, the unit modulates motor speed to reduce energy use and water hammer in industrial fluid-handling systems. Its control functions support variable-speed operation in water distribution, wastewater treatment, irrigation, and other applications that require regulated flow or pressure. The drive adjusts motor output according to process demand instead of operating the connected equipment continuously at full speed.
Its rated electrical output is 1.5 kW. The inverter accepts a supply of 200–240 VAC with three-phase power, drawing a continuous 6.8 A and delivering up to 7.5 A to the motor terminals. At 208 V, the apparent power demand is 2.70 kVA, and a 20 A line protection device helps protect the circuit against overcurrent conditions. Conversion efficiency reaches 0.96, while residual switching and cooling losses are limited to 82 W during full-load operation. The control terminal block provides two digital pulse outputs and one programmable analog output. It can sink or source analog loads as low as 500 Ω, giving connected PLCs multiple channels for process feedback and control signaling.
The drive can operate at ambient temperatures up to 50 °C without derating and at elevations up to 1000 m while maintaining its rated output. High-frequency applications are supported by a pulse-train capability of 32 kHz, allowing the unit to provide a speed reference for external counters and flow meters. Motor leads may extend up to 150 m when shielded or 300 m when unshielded, providing flexibility for equipment installed across large pump rooms or processing areas. Following these cable limits helps maintain electromagnetic compatibility and stable current delivery over the permitted operating range. The available pulse and analog connections also allow the drive to exchange operating data with external process-control equipment.
