FC-202P1K1T6134L8614 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K1T6134L8614 is a three-phase drive from the VLT FC 202 AQUA Drives series with a power rating of 1.1 kW and a continuous output current of 2.6 Amps. It features an energy efficiency class of IE2, an efficiency of 0.97, and supports a maximum input current of 2.4 Amps. The drive allows use of up to 300 meters of unshielded motor cable and operates at ambient temperatures up to 50 °C.
Internal Product Review
The FC-202P1K1T6134L8614 is a Danfoss VLT FC 202 AQUA drive built for three-phase power at 1.1 kW. Operation is notably efficient, with 0.97 efficiency and an IE2 energy efficiency class that support low-loss motor control. A 32 kHz pulse output frequency and 2.6 A continuous output current make the unit a strong fit for smooth, reliable variable-speed duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K1T6134L8614 is an AC variable frequency drive built by Danfoss for the VLT FC 202 AQUA Drives series. It is intended to regulate centrifugal pumps, blowers, and other water-handling motors in plant automation. The drive accepts three-phase power and converts the fixed line frequency into a modulated output that matches process demand. This variable output reduces energy consumption when the connected equipment does not need to operate at full speed. Controlled acceleration and deceleration also reduce mechanical stress on motors, couplings, valves, and piping.
The inverter supplies a continuous motor current of 2.6 A and draws a maximum of 2.4 A from the line, values that support cable and breaker selection. Its power section is rated at 1.1 kW, equivalent to 1.5 HP, making it suitable for small distribution pumps commonly used in building services. A conversion efficiency of 0.97 limits waste heat to an estimated power loss of 50 W. The built-in PWM stage switches at 32 kHz to reduce audible motor noise and torque ripple. One analog output, rated for a 500 Ω load, can retransmit speed or process information, while the digital output source is limited to 40 mA for sensor signaling. Shielded motor cables may extend up to 150 m, while unshielded motor cables may extend up to 300 m, providing flexibility when the motor is installed away from the drive.
The IE2 energy classification indicates that the drive meets current efficiency benchmarks. It can operate at ambient temperatures up to 50 °C without derating when installed below an altitude of 1,000 m. Upstream protection permits a maximum fuse rating of 10 A, coordinating with the inverter’s semiconductor limits. The high-frequency pulse output reaches 32 kHz, helping the motor produce smooth torque while limiting audible switching noise. The analog and digital outputs support communication with external controls, indicators, and process sensors. The permitted motor cable lengths also accommodate installations in which pumps and blowers are distributed across a mechanical room or process area.
