FC-202P1K1T6131Z5183 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K1T6131Z5183 is a 1.5 HP drive from the VLT FC 202 AQUA Drives series, with an efficiency rating of 0.97 and a power rating of 1.1 kW. It features a three-phase power input of 525 to 600 V AC, supports a maximum ambient temperature of 50 °C, and can operate at altitudes up to 1000 meters. The analog output range is 0 or 4 to 20 mA, and the digital output current is 40 mA, with a maximum input current of 2.4 A.
Internal Product Review
The FC-202P1K1T6131Z5183 is a Danfoss VLT FC 202 AQUA drive for three-phase 525–600 V AC systems. A 0.97 efficiency rating and 1.1 kW power capacity give the drive strong operating value in demanding water-handling applications. Support for unshielded motor cable lengths up to 300 m is a notable installation advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K1T6131Z5183 is an AC variable-frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. It modulates three-phase power to control centrifugal pumps, blowers, and other water-handling machinery used in industrial and municipal plants. By varying motor speed instead of relying on throttling valves, the unit helps maintain flow and pressure targets while conserving energy and reducing mechanical wear. Its variable-speed operation also reduces the stress associated with repeated direct starts and abrupt changes in pump output.
This model delivers a continuous mechanical output of 1.1 kW when connected to a 525–600 V AC three-phase power supply. Under rated conditions, the drive draws up to 2.4 A and reaches an efficiency of 0.97, with 50 W dissipated as heat. Circuit protection is provided by a 10 A pre-fuse, and the line-side disconnect accepts copper conductors with cross-sectional areas up to 6 mm². Motor leads terminate on power terminals that accept conductors up to 4 mm². Shielded motor cables may extend up to 150 m, while unshielded cables may extend up to 300 m without exceeding the drive limits. The output stage can operate at altitudes up to 1000 m without derating, allowing installation at many elevated industrial sites.
The control electronics accept 0–24 V DC signals through six digital inputs, providing connections for commands and external status devices. Open-collector digital outputs can supply up to 40 mA for status signaling. The analog output supports either a 0–20 mA or 4–20 mA range for proportional indication of motor speed or process variables to an external controller. These signal options allow the drive to exchange operating commands and process information with common automation equipment. Reliable operation is supported at ambient temperatures up to 50 °C, provided that cabinet airflow prevents heated air from recirculating around the enclosure. The drive should be mounted with sufficient clearance so cooling air can pass through the cabinet and remove internally generated heat.
