FC-202P1K1T6131G2827 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K1T6131G2827 is part of the VLT FC 202 AQUA Drives series and is rated at 1.1 kW with a horsepower of 1.5 HP. It supports three phase power with a line voltage range of 525 to 600 V AC and can continuously output 2.6 Amps. Maximum ambient temperature is 50 degrees Celsius, while installation without derating is allowed up to 1000 meters altitude.
Internal Product Review
The FC-202P1K1T6131G2827 is a Danfoss VLT FC 202 AQUA drive with a 1.1 kW rating and 1.5 HP capacity. Three-phase 3x525–600 V AC input and 0.97 efficiency support stable operation with strong energy performance. Motor cable capability up to 150 m shielded or 300 m unshielded makes the drive especially well suited for distributed installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K1T6131G2827 is a variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. As a member of the VLT AQUA Drive product group, it modulates the speed of centrifugal pumps, blowers, and related water-handling motors in industrial automation, providing energy savings and process stability. The unit converts fixed mains power into controlled three-phase output, allowing precise flow regulation without mechanical throttling. When integrated into automated pumping stations, it helps maintain pressure zones, reduce water hammer, and extend equipment life.
The drive supplies a continuous motor current of 2.6 A, which is the sustained load it can handle without thermal derating. Under nominal conditions, its efficiency is 0.97, so only a small fraction of energy is lost as heat. Full-load operation produces a heat output of 50 W. Electrical power conversion supports up to 1.5 HP, and the input bridge accepts 3 × 525–600 V AC three-phase mains commonly used in high-head pump rooms. At this rating, the unit minimizes panel space, easing integration with filter banks and contactors sized for its maximum input requirement of 2.4 A. The motor and dynamic brake connections accommodate conductors with cross-sectional areas of up to 4 mm².
The rated output power is 1.1 kW, and upstream protection can be provided by a 10 A fuse. Ambient temperatures may rise to 50 °C before external cooling or current reduction becomes necessary. Operation without altitude derating is permitted up to 1,000 m, while installation at altitudes up to 3,000 m requires derating. Shielded motor leads can extend to 150 m, while unshielded motor leads can extend to 300 m, supporting installations in which pumps are located away from the drive cabinet. A disconnect link that accommodates conductors with cross-sectional areas of up to 6 mm² can be fitted for rapid electrical isolation.
