FC-202P1K1T4131X4508 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K1T4131X4508 is part of the VLT FC 202 AQUA Drives series and features a power rating of 1.1 kW and operates on three phase power at 380-480 VAC. This drive provides a continuous output current of 3.0 A at 380-440 V, reaches an efficiency of 0.96, and supports up to 1.5 horsepower. The unit is designed for a maximum ambient temperature of 50 °C and supports shielded motor cables up to 150 meters.
Internal Product Review
The FC-202P1K1T4131X4508 is a Danfoss VLT FC 202 AQUA drive with a 1.1 kW rating and three-phase 380-480 VAC input. Technical performance is strong, with 0.96 efficiency and 3.0 A continuous output current at 380-440 V supporting stable pump and fan duty. Extended installation reach up to 300 m on unshielded motor cable makes this drive a very capable choice for water and wastewater systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K1T4131X4508 is a variable frequency drive produced by Danfoss within the VLT FC 202 AQUA Drives series. The unit belongs to the VLT AQUA Drive product group and is used in industrial automation to regulate the speed of three-phase induction motors that run pumps, blowers, and similar water-handling equipment. By adjusting the output frequency and voltage, the drive provides process control while reducing energy demand and mechanical stress on connected machinery. Its variable-speed operation can match motor performance to changing flow or pressure requirements instead of relying on continuous full-speed operation.
The drive accepts three-phase mains power from 380 to 480 VAC and converts this input into adjustable voltage and frequency for the connected motor. At 380–440 V, the converter can deliver 3.0 A of continuous output current. When the supply is 400 V, its continuous apparent power capability reaches 2.1 kVA, while operation at 460 V provides 2.4 kVA. Motor output is rated at 1.1 kW, indicating the applicable motor capacity for normal operation. The listed electrical efficiency is 0.96, and power loss during steady operation is 58 W. The drive uses the 202 series identifier and the corresponding parameter structure for this platform.
Panel placement must account for the drive’s thermal and wiring limits. Operation is permitted at ambient temperatures up to 50 °C, after which output derating is required. The maximum permitted pre-fuse rating is 10 A, allowing branch protection to coordinate with the converter. Mains conductors can have a cross-sectional area of up to 4 mm², while conductors on the disconnect side can have an area of up to 6 mm². Maximum input current is 2.7 A throughout the 380–440 VAC range. For motor wiring, a shielded cable run may extend to 150 m when appropriate electromagnetic compatibility practices are followed. An unshielded motor cable may extend to 300 m where installation conditions permit its use. At 441–480 V, the unit provides 2.7 A of continuous motor current across the upper portion of its supply range.
