FC-202P1K1T4131G4315 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K1T4131G4315 is part of the VLT FC 202 AQUA Drives series and is rated for 1.1 kW power and 1.5 horsepower. It operates on three phase 380-480 VAC, has a maximum continuous output current of 2.7 Amps at 441-480 V and a maximum efficiency of 0.96. The drive features an 8-bit analog output resolution and supports up to 50°C ambient temperature and 1000 meters altitude without derating.
Internal Product Review
The FC-202P1K1T4131G4315 is a Danfoss VLT AQUA drive built for three-phase power at 380 to 480 VAC. A 1.5 HP rating with 0.96 efficiency makes the unit a strong fit for water and process-duty installations. The 32 kHz maximum output frequency stands out as a valuable control feature.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K1T4131G4315 is a variable-frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. It is intended for centrifugal pumps, blowers, and similar water-handling loads where speed regulation improves process stability and lowers energy demand. By converting fixed three-phase mains power into a synthesized output, the drive allows PLCs or stand-alone controllers to match motor torque to real-time flow or pressure requirements while soft-starting the mechanical system and limiting hydraulic shocks.
The drive has a mains voltage range of 380–480 VAC; it accepts three-phase power and draws a continuous input current of 2.7 A at 460 V. On the motor side, it supplies a continuous output current of 2.7 A and provides a motor output of 1.1 kW, or 1.5 HP. Pulse-width modulation can operate at up to 32 kHz, reducing acoustic noise and allowing finer current control at low speeds. The 2.4 kVA line demand assists with transformer or generator sizing, while a 10 A upstream fuse provides coordinated branch-circuit protection. Analog feedback is available through an 8-bit current-sourcing channel rated for a 500 Ω load. Digital signaling can sink or source up to 40 mA for relays or optoisolators.
Conversion efficiency reaches 0.96, and the drive releases 58 W of heat under full load; this value assists with panel ventilation or heat sink selection. The drive maintains full performance at altitudes up to 1000 m and operates in ambient temperatures up to 50 °C without current derating. Shielded motor leads may extend up to 150 m with conductors as large as 4 mm², supporting installation in remote pump rooms. The carrier frequency remains stable across the permitted cable length, helping the drive maintain consistent motor control when the equipment is installed away from the driven load.
