FC-202P1K1T2136H9353 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K1T2136H9353 is part of the VLT FC 202 AQUA Drives series and has a power rating of 1.1 kW with a maximum output of 1.5 HP. It operates on three phase power with a mains voltage range of 200 to 240 VAC and a continuous output current of 6.6 A. The drive offers an efficiency of 0.96 and is rated for operation at altitudes up to 1000 meters without derating.
Internal Product Review
The FC-202P1K1T2136H9353 is a Danfoss VLT FC 202 AQUA drive built for dependable variable speed control, with a 1.1 kW power rating and three-phase power input. Performance stands out with 0.96 efficiency and an IE2 energy efficiency class, making the drive especially attractive for energy-conscious installations. Strong current capability with 6.6 A continuous output current makes this model a very solid choice for compact industrial drive systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K1T2136H9353 is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It converts fixed-frequency three-phase mains power into a modulated output that allows automation systems to adjust motor speed and torque as process conditions change. Nominal operation is supported by a 200–240 VAC three-phase power supply, making the unit suitable for common industrial power systems in this voltage range.
This model draws a continuous input current of 5.9 A and can deliver a continuous output current of 6.6 A, supporting appropriate sizing of upstream protection and cabling. Its motor output is rated at 1.1 kW, which corresponds to a shaft output of 1.5 HP for small pumps or blowers that require moderate torque. The drive has an internal efficiency of 0.96 and a specified power dissipation of 63 W. Its output overload capacity reaches 9.9 A for short periods, and an input fuse rated up to 20 A is recommended. Line, motor, and brake conductors may use 4 mm² (12 AWG) wire, whereas the disconnect link can accept 6 mm² (10 AWG) conductors. Shielded motor leads may extend to 150 m, while unshielded leads may extend to 300 m without exceeding the permitted cable lengths. These conductor capacities accommodate the power connections without requiring separate terminal adapters. The available overload current supports brief increases in motor demand during acceleration or changing process loads.
The unit meets the IEC IE2 efficiency benchmark, supporting applications that monitor and manage energy consumption. Reliable performance is maintained at altitudes up to 1000 m without derating, allowing installation in many elevated industrial locations. Ambient air may reach 50 °C before the continuous output current must be reduced, so enclosure ventilation should keep operating temperatures within the permitted range.
