FC-202P1K1T2135N3656 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K1T2135N3656 is part of the VLT FC 202 AQUA Drives series and is designed for three phase power with a mains voltage range of 200 to 240 VAC. It features a continuous output current of 6.6 A, supports a maximum output frequency of 32 kHz, and delivers an efficiency of 0.96. This drive has a power rating of 1.1 kW, offers 1 analog output and 2 digital outputs, and has a power loss at rated load of 63 watts.
Internal Product Review
The FC-202P1K1T2135N3656 is a VLT FC 202 AQUA drive rated at 1.1 kW for three-phase power. With 0.96 efficiency and a 32 kHz maximum output frequency, the drive delivers smooth motor control and reduced operating losses. A strong choice for pumping applications that demand stable and efficient performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K1T2135N3656 is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It is installed in pumping and water-treatment systems to regulate motor speed according to process demand. The drive converts fixed-frequency mains power into a variable-frequency output, allowing connected pump motors to operate at the speed required by the application. This functionality supports soft starts, closed-loop pressure control, and reduced energy consumption in centrifugal pump systems.
The drive has a continuous apparent power rating of 2.38 kVA and operates from a three-phase input. Under rated load, the line side carries 5.9 A, while the inverter delivers 6.6 A to the motor terminals. A supply range of 200–240 VAC allows direct connection to compatible low-voltage distribution systems. Overall conversion efficiency reaches 0.96, limiting the amount of energy lost as heat during operation. One analog output can serve loads with an impedance as low as 500 Ω, while the control card accepts one analog reference through an input resistance of 4 kΩ. Two digital outputs can each supply up to 40 mA for external relays or compatible control devices. A 20 A prefuse provides protective coordination, and the three-phase power connections are suitable for common pump motors.
The drive supports a motor output of 1.5 HP, which corresponds to 1.1 kW for small and midsize centrifugal pumps. Its pulse-width modulation switching frequency can reach 32 kHz, helping reduce audible motor noise while improving output current quality. Power loss at rated load is limited to 63 W, which helps control panel temperature when the drive is installed in a compact enclosure. The variable-speed output allows pump flow to be adjusted without relying entirely on throttling valves or other mechanical controls. Closed-loop operation can maintain pressure as demand changes in water distribution, filtration, and irrigation systems.
