FC-202P1K1T2134F6394 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K1T2134F6394 is part of the VLT FC 202 AQUA Drives series and provides a power rating of 1.1 kW and 1.5 HP. This three-phase drive supports a mains voltage of 200 to 240 VAC and delivers a continuous output current of 6.6 A with an efficiency of 0.96. It features one analog output, two digital outputs, and a maximum frequency output of 32 kHz.
Internal Product Review
The FC-202P1K1T2134F6394 is a Danfoss VLT FC 202 AQUA drive designed for three-phase power at 200 to 240 VAC. A 1.1 kW power rating and 1.5 HP capacity make the unit a strong fit for compact pump and fan applications. Efficiency at 0.96 stands out as a key advantage for energy-conscious drive systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K1T2134F6394 is an AC variable frequency drive manufactured by Danfoss within the VLT FC 202 AQUA Drives series. It regulates the speed of centrifugal pumps and blowers used in industrial water treatment and irrigation systems. By adjusting motor frequency and voltage, the drive maintains constant process pressure or flow while lowering energy use and reducing hydraulic shock throughout the piping network. Its control functions support pump applications that require stable operation as demand changes over time.
Rated mechanical power reaches 1.5 HP, corresponding to an electrical output of 1.1 kW at the motor terminals. The power section accepts three-phase line supplies from 200–240 VAC and produces a pulse-width-modulated output with a carrier frequency of up to 32 kHz. An efficiency of 0.96 at nominal load limits heat generation and supports installation in densely arranged cabinets. One analog output can provide a 0–10 V or 0–20 mA signal to loads with an impedance as low as 500 Ω. Two digital outputs can sink or source up to 40 mA for functions such as contactor confirmation and alarm signaling. Continuous apparent power at 208 V is 2.38 kVA, allowing the drive to operate near full torque across its rated speed range.
Input conductors can carry 5.9 A continuously, while the inverter supplies 6.6 A of steady three-phase current to the motor. These currents remain within the 20 A pre-fuse limit used for branch-circuit protection. The thermal design permits operation in ambient temperatures up to 50 °C, and the full-load power loss is limited to 63 W. The terminal block accepts line conductors with cross-sectional areas of up to 4 mm², providing adequate capacity for the applicable supply wiring. Shielded motor cables may extend up to 150 m without requiring output reactors, allowing the drive to serve motors installed away from the control cabinet. The two digital outputs share a common connection with the control electronics, while the analog output supports independent signal scaling for connected monitoring or control devices.
