FC-202P1K1T2134F6389 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P1K1T2134F6389 belongs to the VLT FC 202 AQUA Drives series and operates on three phase power with a mains voltage range of 200 to 240 VAC. This drive offers a power rating of 1.1 kW, 1.5 horsepower, and delivers a maximum output frequency of 590 Hz. It has a continuous output current of 6.6 A and supports a maximum ambient temperature of 50 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K1T2134F6389 is a variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. Classified under the VLT AQUA Drive product group, the unit serves HVAC and water-handling systems by converting fixed three-phase mains power into a variable-frequency output that matches pump or blower demand. When installed in industrial automation panels, it improves process stability while reducing energy consumption and mechanical stress on connected induction motors.
On the input side, the drive accepts 200–240 VAC three-phase power and converts it through an IGBT bridge into a modulated output. Under rated conditions, the inverter can deliver a continuous motor current of 6.6 A. Frequency synthesis ranges from 0 Hz up to 590 Hz, so high-speed pumps can be accelerated beyond the utility frequency when required. Electrical conversion losses are limited, with overall efficiency reaching 0.96 and the remaining heat totaling only 63 W. These values permit installation in compact, fan-cooled panels without auxiliary chillers while still meeting pump torque demands.
Output power corresponds to 1.5 HP, a rating often used for booster pumps and smaller aeration blowers. The recommended upstream fuse is rated at 20 A, allowing coordination with standard miniature circuit breakers. The unit maintains full capacity at altitudes up to 1000 m and in ambient temperatures that do not exceed 50 °C, making it suitable for elevated mezzanine or rooftop pump rooms. Cable management is simplified by support for shielded motor cables up to 150 m long and unshielded motor cables up to 300 m long. The terminal blocks accept conductors with cross-sectional areas up to 4 mm², while the disconnect terminals accept conductors up to 6 mm². A relative humidity tolerance of 95% enables operation in damp filtration halls without enclosure heaters.
