FC-202P1K1T2131G4314 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K1T2131G4314 belongs to the VLT FC 202 AQUA Drives series and is designed for three phase power with a power rating of 1.1 kW. It features a continuous output current of 6.6 A, operates within a mains voltage of 200 to 240 VAC, and supports a control scan interval of 5 milliseconds. The drive achieves an efficiency of 0.96 and is capable of handling a maximum ambient temperature of 50 degrees Celsius.
Internal Product Review
The FC-202P1K1T2131G4314 is a Danfoss VLT FC 202 AQUA Drive with a 1.1 kW rating and three-phase 200-240 VAC input. A 5 ms control scan interval and 0.96 efficiency give this drive crisp response and very respectable operating performance in pump and fan applications. Motor cable support up to 150 m shielded or 300 m unshielded is a strong advantage for flexible field installation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K1T2131G4314 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. Designed for pump and fan duties in fluid-handling plants, the drive converts fixed-frequency mains power into variable-frequency output, allowing control systems to match motor speed to real-time flow requirements. This closed-loop control can reduce energy consumption while helping maintain discharge pressure within the operating limits required by automated processes.
At 208 V, the inverter can deliver 2.38 kVA continuously, corresponding to a mechanical output of 1.1 kW or 1.5 HP. The power stage provides a continuous motor current of 6.6 A while drawing no more than 5.9 A from the line. The drive connects to a three-phase supply from 200 to 240 VAC. Its efficiency reaches 0.96, resulting in 63 W of heat loss under rated load. A 5 ms control scan interval allows rapid feedback updates from pressure transmitters or PLC logic. The microprocessor commands carrier switching up to a maximum output frequency of 590 Hz, providing sufficient range for high-speed pumps that require extended constant-torque operation. Shielded motor cables may extend up to 150 m, while unshielded motor cables may extend up to 300 m without exceeding the drive’s voltage rise limits.
Full-load operation is available at ambient temperatures from 0 °C to 50 °C. Thermal derating is not required until the installation altitude exceeds 1000 m above sea level. In switchboard installations, the drive has a short-circuit withstand capacity of 100,000 A rms. Upstream protection requires a fuse rated no higher than 20 A. Adequate enclosure ventilation must remove the heat generated during continuous operation, helping the drive maintain its permitted operating temperature in enclosed installations.
