FC-202P1K1T2131B9160 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K1T2131B9160 is part of the VLT FC 202 AQUA Drives series and has a power rating of 1.1 kW or 1.5 HP. This three phase drive operates with a mains voltage of 200 to 240 VAC and offers a continuous output current of 6.6 amps. It is rated for a maximum ambient temperature of 50°C and maintains efficiency up to 0.96.
Internal Product Review
The FC-202P1K1T2131B9160 is a Danfoss VLT FC 202 AQUA drive rated at 1.1 kW for 200 to 240 VAC operation. A 0.96 efficiency rating and 6.6 A continuous output current support smooth, economical control in pump and water handling duties. Support for unshielded motor cable runs up to 300 m makes the drive a strong choice for flexible AQUA installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K1T2131B9160 is a variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. Within the VLT AQUA Drive product group, it is intended for pump, fan, and blower applications in which speed control maintains process flow and reduces energy consumption. The drive receives fixed-frequency power and delivers a modulated output that allows automation systems to regulate motor speed without mechanical throttling. This operating method makes the unit suitable for industrial and municipal water applications that require controlled pressure, flow, or circulation.
The unit supplies a continuous output current of 6.6 A and accepts a mains voltage of 200 to 240 VAC from three-phase power grids. Its electrical capacity supports a power rating of 1.1 kW, equivalent to 1.5 HP, while overall conversion efficiency reaches 0.96 at rated load. The drive’s front-end components draw no more than 5.9 A continuously, so upstream circuit protection can use a 20 A prefuse. The line-side terminals accept conductors up to 4 mm², while the disconnect link accepts conductors up to 6 mm². Rigid control wiring can be up to 1.5 mm², and the protective ground conductor must be at least 10 mm². Motor cabling may extend up to 150 m when shielded or 300 m when unshielded, providing flexibility for large pumping halls and distributed skid layouts.
The drive maintains full performance at elevations up to 1000 m without requiring output derating. It can also operate at ambient temperatures as high as 50 °C, which supports installation in warm equipment rooms when the required clearances and airflow are provided. Thermal losses are limited to 63 W at rated load, reducing the amount of heat that the enclosure ventilation system must remove. These operating conditions should be considered when selecting the cabinet location, arranging ventilation paths, and maintaining adequate spacing around the drive. Proper cable routing also helps separate control conductors from motor and mains wiring, reducing the likelihood of electrical interference in automated fluid-handling systems.
