Product Description:

The FC-202P1K1S2134F6382 is an AC variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. It modulates the speed of centrifugal pumps, blowers, and other induction motors so that water-handling processes can match flow demand without mechanical throttling. By integrating with plant controllers, the unit adjusts motor torque in real time, reducing energy use and extending equipment life in industrial automation systems.

Electrical sizing centers on a single-phase supply of 200 – 240 VAC. From this input the drive delivers up to 1.1 kW (1.5 HP) of shaft power while drawing a continuous line current of 12.5 A. The internal converter is rated at 2.4 kVA at 208 V and feeds an inverter stage that supplies 6.6 A of continuous output to the motor. Full-load efficiency reaches 0.98, so only 44 W are lost as heat during steady operation. Copper conductors must have insulation that withstands 75 °C to align with drive terminal specifications. These current, voltage, and thermal limits define the continuous operating envelope and guide cable sizing, motor selection, and enclosure ventilation.

Short-term events are handled by 13.8 A of intermittent input current and a peak motor phase current of 7.3 A. A 20 A pre-fuse protects upstream wiring from fault energy, and ambient air can reach 50 °C without derating when the installation altitude does not exceed 1000 m. Output reactors or filters may be connected with up to 150 m of shielded cable or 300 m of unshielded cable, supporting remote motor rooms in large facilities. The drive belongs to the VLT AQUA Drive product group and carries the internal series identifier 202, pairing its single-phase topology with water-industry software functions for variable-torque loads.