FC-202P1K1S2131G4134 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K1S2131G4134 is part of the VLT FC 202 AQUA Drives series and features a horsepower rating of 1.5 HP and a power rating of 1.1 kW. It accepts a single phase power supply at 200 to 240 VAC and provides a continuous output current of 6.6 A with an efficiency of 0.98. The drive supports a maximum ambient temperature of 50 °C and offers one analog and two digital outputs.
Internal Product Review
The FC-202P1K1S2131G4134 is a Danfoss VLT AQUA Drive built for single-phase 200 to 240 VAC service. Efficiency of 0.98 and a 32 kHz maximum output frequency support smooth motor control and economical operation. A 1.1 kW power rating paired with 6.6 A continuous output current makes the drive a strong choice for compact pumping applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K1S2131G4134 is an AC drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It regulates the speed of pump motors in industrial fluid systems by converting incoming mains power into a variable-frequency output. This capability allows an automation controller to adjust motor speed according to changes in flow demand, reducing unnecessary energy consumption when full pump output is not required.
The drive has a rated motor output of 1.1 kW and accepts single-phase power at 200–240 VAC. Its power stage supplies a continuous output current of 6.6 A and limits apparent power to 2.4 kVA. The unit operates with an efficiency of 0.98, helping reduce the amount of input power converted into heat during operation. Continuous input current is 12.5 A, and upstream circuit protection can use a maximum pre-fuse rating of 20 A. One analog output supports loads up to 500 Ω and maintains an accuracy of 0.8% of full scale. Two digital outputs, each rated for 40 mA, provide connections for relays, programmable logic controllers, or other compatible control devices.
The pulse-width modulation stage supports a switching frequency of up to 32 kHz, which can reduce audible motor noise and provide smoother output control. The drive can operate at ambient temperatures up to 50 °C, provided that installation clearances and enclosure airflow satisfy the applicable operating requirements. It withstands vibration levels of 1.0 g, supporting use in industrial installations where machinery may transmit continuous mechanical vibration. The unit produces a continuous load loss of 44 W, which must be considered when calculating enclosure ventilation and heat dissipation. Its combination of analog and digital outputs allows the drive to transmit operating values and status signals to supervisory control equipment without requiring separate signal-conversion hardware.
