FC-202P18KT6134N0371 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P18KT6134N0371 is part of the VLT FC 202 AQUA Drives series and delivers a power rating of 18.5 kW with a horsepower of 25 HP. It operates on three phase power with a maximum output frequency of 590 Hz and an efficiency of 0.98. This drive supports a maximum output current of 27 Amps at 575 V and can operate at ambient temperatures up to 50 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P18KT6134N0371 is an AC variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. The unit belongs to the VLT AQUA Drive product group, which is tailored for pump and fan control in water-handling systems. By altering motor speed rather than relying on throttling devices, the drive helps regulate flow and pressure while lowering energy use and mechanical stress. This method also allows the connected equipment to respond more closely to changing process demand.
It operates from a three-phase 575 V supply and is rated at 18.5 kW, which is equivalent to 25 HP of mechanical output. Under nominal conditions, the inverter maintains an efficiency of 0.98, allowing most of the incoming 26.9 kVA to reach the motor terminals. The continuous output current is 27 A, while line inrush is limited to 24 A, so upstream protection can be coordinated with the 50 A prefuse value. Analog feedback circuits can drive loads up to 500 Ω, and transistorized digital outputs source 40 mA at switching rates up to 32 kHz for high-speed status signaling. Closed-loop frequency regulation spans from 0 to 590 Hz, providing a wide operating range when the drive is paired with special-duty or overspeed-rated induction motors.
The drive supports shielded motor leads up to 150 m and unshielded runs up to 300 m without exceeding the stated EMC limits. The ambient temperature may reach 50 °C before derating is required, which simplifies ventilation planning for equipment rooms and control cabinets. Startup and shutdown profiles can be extended to 3600 s, helping protect hydraulic networks from pressure shock while allowing pumps to fill pipelines gradually. At rated load, the electronics dissipate only 370 W, reducing the cooling demand in densely populated panels. The drive is suitable for flow and pressure control in municipal lift stations, filtration skids, irrigation boosters, and other water-handling systems that use variable-speed pumps.
