FC-202P18KT4E20H1XGXXXXSXXXXA0BXCXXXXD0 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-202P18KT4E20H1XGXXXXSXXXXA0BXCXXXXD0 drive is manufactured by Danfoss and is part of the VLT FC 202 AQUA Drives series. It features a power rating of 18.5 kW, provides 25 horsepower, and operates on 380 to 480 VAC three phase power. The drive has an IP20 protection level and includes a graphical local control panel, an RFI Class A1/B filter, and a MCB-107 24V DC backup D option.
Internal Product Review
The FC-202P18KT4E20H1XGXXXXSXXXXA0BXCXXXXD0 is a Danfoss VLT AQUA drive built for industrial pumping and water system control, with a 25 HP rating and 380 to 480 VAC operation. PROFIBUS DP communication and a graphical local control panel support efficient commissioning and dependable integration into automated process lines. IP20 chassis protection makes the unit a strong choice for enclosed panel installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P18KT4E20H1XGXXXXSXXXXA0BXCXXXXD0 is an AC variable frequency drive built by Danfoss within the VLT FC 202 AQUA Drives series. The unit converts fixed-frequency utility power into variable-voltage, variable-frequency output for centrifugal pumps, aerators, and blower motors used in process water automation. Adjusting motor speed to match real-time demand can reduce energy consumption and mechanical stress compared with systems that regulate flow by throttling valves. The drive is intended for continuous-flow installations that require controlled acceleration, stable speed regulation, and integration with plant automation systems.
This drive accepts an input of 380–480 VAC from a three-phase power supply, making it suitable for common industrial switchboards. It provides 18.5 kW of continuous output power, equivalent to 25 HP, for medium-duty pumping and water-handling equipment. Compliance with RFI Class A1/B (C1) limits conducted electromagnetic emissions, which can reduce the need for additional cabinet filtering. The drive does not include a brake chopper, so the system must prevent regenerative energy from raising the DC-link voltage excessively. A mains option is not integrated into this configuration. The printed circuit boards are uncoated, so the installation area should be protected from condensation and corrosive airborne contaminants. The standard language pack provides the usual parameter names and menu terminology for local configuration.
The enclosure has an IP20 chassis protection level, so the drive should be installed inside a suitable cabinet where moisture, dust, or accidental contact may occur. Network communication is provided by the PROFIBUS DP MCA 101 A-option card, which exchanges control words, operating commands, and status data with a plant PLC. An integrated MCB-107 24 V DC backup module keeps the control electronics active during a loss of mains power, allowing operating data to remain available while the connected system shuts down. Local setup and manual control are available through the front-mounted graphical local control panel. Power conductors enter through the standard cable entries associated with Adaptation A. Adaptation B is unused, and the B-option position is blank. No dedicated software option or C0 and C1 option cards are installed in this configuration.
