FC-202P18KT2131F1084 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P18KT2131F1084 is part of the VLT FC 202 AQUA Drives series and has a power rating of 18.5 kilowatts or 25 horsepower. It operates at 200 to 240 volts AC with three phase power, and features two digital pulse outputs and one analog output with an 8-bit resolution. The drive supports a maximum output frequency of 32 kilohertz and can be used at altitudes up to 1000 meters without derating.
Internal Product Review
The FC-202P18KT2131F1084 is a Danfoss VLT FC 202 AQUA Drive designed for three-phase power at 18.5 kW. A 200 to 240 VAC mains range and 25 HP output make this drive a strong fit for demanding water and pump applications. Stable operation at ambient temperatures up to 50 °C is a standout advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P18KT2131F1084 is a variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. The unit converts fixed-frequency three-phase power into a programmable output that allows plant controllers to adjust pump and blower speeds in water-handling and HVAC processes. By regulating motor frequency, it can reduce energy consumption and provide gentle ramping during start and stop sequences in industrial automation.
The drive delivers 25 HP and accepts an input of 200 – 240 VAC. It supports continuous operation at temperatures up to 50 °C and altitudes up to 1000 m without derating. The inverter synthesizes output frequencies with 12-bit resolution and reaches 32 kHz, helping reduce audible motor noise. One analog channel with 8-bit resolution and 500 Ω impedance and two digital pulse outputs share operating data with external controls. Digital inputs tolerate 28 V DC, while transistor outputs can source 40 mA for relays or indicators. The drive withstands vibration of 1.0 g, supporting mechanical stability in typical plant installations. Shielded motor cable can extend up to 150 m, allowing the drive to remain inside dry switchgear while serving remotely installed equipment. Its rated electrical power is 18.5 kW, making it suitable for midrange centrifugal pumps and similar loads.
System protection and electromagnetic compatibility are addressed at the input and output stages. Upstream circuit breakers can be selected with a maximum prefuse rating of 125 A to clear short-circuit faults quickly. With a 36 m motor lead, the output pulses reach a peak voltage of 0.608 kV and have a voltage rise rate of 1.993 kV/µs. These values assist with the selection of suitable surge filters and motor insulation classes. The drive maintains full performance when connected to balanced three-phase lines. Its control terminals and pulse outputs provide direct interfaces for automation equipment, reducing the need for separate signal-conversion hardware.
