FC-202P15KT6134N0848 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-202P15KT6134N0848 is a 20 HP drive from the VLT FC 202 AQUA Drives series by Danfoss, offering a power rating of 15 kW and an efficiency of 0.98. It operates with a continuous input current of 20 A and supports three phase power at 575 V. The drive can be used with shielded motor cables up to 150 meters and functions at a maximum ambient temperature of 50 degrees Celsius.
Internal Product Review
The FC-202P15KT6134N0848 is a Danfoss VLT AQUA drive designed for three-phase 15 kW water and pumping applications. Efficiency at 0.98 and 22 A continuous output current support stable, energy-conscious operation under sustained load. A 50 °C maximum ambient temperature adds valuable installation flexibility, making this drive a strong choice for demanding AQUA systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P15KT6134N0848 is an AC variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. Within water-handling and pump automation, the unit modulates motor speed to match real-time flow or pressure demands, reducing energy use and mechanical stress. It connects directly to three-phase industrial mains and provides pump-focused parameters for centrifugal pumps, blowers, and similar fluid-control equipment. The drive can regulate motor output as process conditions change, helping prevent unnecessary operation at full speed.
With a 575 V supply, the drive draws a continuous input current of 20 A and delivers a continuous output current of 22 A, resulting in an apparent power requirement of 21.9 kVA. The power stage has an efficiency of 0.98, so approximately 300 W of heat must be removed under rated load. During short demand spikes, the input line can accept 22 A while the inverter can supply 24 A to the motor, allowing brief periods of increased torque without derating. Power-up frequency is limited to one event per minute to protect the precharge network, and upstream circuit protection is provided by 40 A fuses. Shielded motor leads may be up to 150 m long, while unshielded leads may extend to 300 m without exceeding the stated cable limits. These cable allowances support layouts in which the drive cabinet is separated from pumps or blowers by a substantial distance.
The DC link and output stage support a continuous power flow of 15 kW for the connected motor. The thermal design permits ambient temperatures up to 50 °C and installation altitudes up to 1000 m without reducing the output. Operation is restricted to a balanced three-phase power supply. Single-phase input power is not supported, so the incoming electrical service must provide the correct phase arrangement. The available thermal and electrical capacity supports operation in pumping stations, irrigation systems, and wastewater treatment equipment where motor speed must respond to changing process demand.
