FC-202P15KT6134H3014 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-202P15KT6134H3014 is a 20 HP drive made by Danfoss as part of the VLT FC 202 AQUA Drives series. It has a power rating of 15 kW and operates with three phase power. The drive features 2 analog inputs with a 10 bit resolution and a 200 Hz bandwidth, and supports a maximum ambient temperature of 50 °C.
Internal Product Review
The FC-202P15KT6134H3014 is a Danfoss VLT FC 202 AQUA Drive designed for three-phase power and a 15 kW rating. Control performance is impressive, with 200 Hz analog input bandwidth and digital output capability up to 32 kHz for accurate process response. The unit remains a strong fit for demanding installations, especially with operation up to 50 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P15KT6134H3014 is a variable-frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. The unit belongs to the VLT AQUA Drive product group and is installed in pumping or aeration equipment to match motor speed with process demand, lowering energy consumption in industrial and municipal water applications. It interfaces directly with three-phase induction motors and includes the local I/O required for on-site monitoring and control.
The drive supplies a continuous electrical output of 15 kW, which is mechanically equivalent to 20 HP, when powered by three-phase power. Two analog inputs operate within a bandwidth of 200 Hz, and their converter provides 10-bit resolution to support level or flow feedback signals. One analog output can supply a 0–10 V signal to loads with an impedance of at least 500 Ω, while two digital outputs are available for status or pulse duties. The drive accepts one power-up per minute, helping protect internal components from repeated power cycling. A 40 A line fuse is recommended on the mains side, and two integrated changeover relays permit pump alternation or alarm forwarding. Shielded motor leads may be run up to 150 m, while unshielded motor leads may be run up to 300 m without exceeding the drive limits.
The drive operates at full output up to 1000 m above sea level and can be used at elevations up to 3000 m with thermal derating. Ambient operation is permitted at temperatures up to 50 °C before output reduction begins. The digital outputs can switch at frequencies up to 32 kHz, enabling high-resolution flow metering. The noise-suppression stage meets RFI Class A1/B (C1) requirements for installations where category C1 emissions apply. Current limiting accounts for motor-cable capacitance to help maintain stable operation when long motor leads are installed.
