FC-202P15KT6131Z0055 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P15KT6131Z0055 is part of the VLT FC 202 AQUA Drives series, providing a power rating of 15 kW and 20 horsepower. This three phase drive has an efficiency of 0.98 and supports continuous power outputs of up to 21.9 kVA at 550 V with a maximum pre-fuse rating of 40 Amps.
Internal Product Review
The FC-202P15KT6131Z0055 is a Danfoss VLT FC 202 AQUA Drive built for precise variable speed control in demanding pump and water handling systems. Three-phase power architecture and 0.98 efficiency support stable operation with strong energy performance. The 15 kW and 20 HP rating make the drive a highly capable choice for dependable industrial duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Danfoss FC-202P15KT6131Z0055 is an AC variable frequency drive in the VLT FC 202 AQUA Drives series. Designed for pump and fan duty in industrial automation, the unit sits between the mains and an induction motor, generating a variable output frequency that controls shaft speed without mechanical throttling. Built-in liquid-process control functions support integration into PLC-controlled facilities where stable pressure or flow is required. The drive operates within the electrical limits of three-phase supply networks while adjusting motor performance to match changing process demand.
With a continuous apparent power rating of 18.1 kVA at 550 V in high-overload mode, the converter can start centrifugal pumps against loaded pipes. At 575 V, the same mode permits 17.9 kVA, indicating only a minor reduction as line voltage rises. Overall efficiency reaches 0.98, so most input energy is delivered to the motor instead of being dissipated as heat. The drive delivers a steady output current of 19 A on supplies ranging from 525 V to 550 V, while normal-overload operation increases the available current to 23 A. For supply networks operating from 551 V to 600 V, the high-overload output current is 18 A. Internal power loss remains limited to 220 W under the stated operating conditions, easing panel cooling requirements. The power section accepts three-phase input power for use with compatible industrial supply systems.
Normal-overload capability reaches 21.9 kVA at 550 V, providing additional capacity during sustained flow regulation. Input protection can use 40 A fuses selected to accommodate inrush current and interrupt electrical faults. On supplies ranging from 551 V to 600 V, the unit delivers 22 A in normal-overload mode, making it suitable for many deep-well pump motors and comparable loads. Power loss under this duty reaches 300 W and can be removed through standard enclosure airflow. The drive supports a rated motor output of 15 kW for variable-speed pump and fan applications. Its control functions regulate motor speed in response to process commands while maintaining the applicable current and power limits for the selected overload mode.
