FC-202P15KT6131G1537 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P15KT6131G1537 is a VLT FC 202 AQUA Drives series unit with a power rating of 15 kW and a 20 HP output. It features three phase power, an efficiency of 0.98, and a continuous output current of 23 A at 550 V. The drive includes one analog output, supports a maximum output frequency of 32 kHz, and is rated for a short-circuit current up to 100000 Arms.
Internal Product Review
The FC-202P15KT6131G1537 is a Danfoss VLT FC 202 AQUA drive built for demanding water-process control, with a 15 kW rating and three-phase power input. Operation is notably efficient, combining 0.98 efficiency with 23 A continuous output current at 550 V for stable variable-speed performance. A 100000 Arms short-circuit current rating stands out as a strong advantage for industrial installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P15KT6131G1537 is a three-phase AC variable frequency drive manufactured by Danfoss and supplied in the VLT FC 202 AQUA Drives series. As part of the VLT AQUA Drive product group, it converts fixed mains power into a controlled output suitable for centrifugal pumps, blowers, and other motors that require speed regulation in industrial automation. By adjusting output frequency and voltage, the drive reduces mechanical stress, saves energy, and allows control systems to match motor torque to real-time process demands. Its variable-speed operation can also reduce abrupt starts and stops in pumping systems, helping limit pressure surges and unnecessary wear on connected equipment.
The inverter has a rated motor output of 15 kW, which is equivalent to 20 HP. At the 550 V operating point, it can supply a continuous motor current of 23 A, and it modulates that current with carrier frequencies up to 32 kHz to minimize acoustic noise and torque ripple. Overall conversion efficiency reaches 0.98, so only a small fraction of the incoming energy is lost as heat. One analog output is available for process feedback, and the analog channel can drive loads with an impedance as low as 500 Ω without signal distortion. This output can transmit a monitored process value to compatible control or indicating equipment.
With a 575 V supply, the rectifier draws 20 A continuously, and thermal dissipation under these conditions is estimated at 300 W. Branch-circuit protection can use a 40 A upstream fuse, while the enclosure can withstand fault currents up to 100,000 A RMS without losing containment. Control terminals accept digital commands, with each input presenting an impedance of 4 kΩ and tolerating 28 V DC. The single transistor output can source 40 mA for relays or optical isolators. The unit operates on three-phase power, and its series identifier is 202 within the VLT AQUA Drive platform. Cabinet ventilation should account for the stated heat dissipation while preserving the clearances required for reliable airflow around the enclosure.
