Product Description:

The FC-202P15KT4E20H1XGXXXXSXXXXAXBXCXXXXDX is an AC variable-frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. It regulates the speed of centrifugal pumps and fans, matching motor output to real-time demand in fluid-handling applications across industrial and municipal automation systems. By varying the applied frequency and voltage, the unit enables soft starting, reduces energy consumption, and limits mechanical stress on connected equipment during acceleration and normal operation.

The drive delivers a continuous electrical output of 15 kW, corresponding to a motor output of 20 HP when connected to a standard induction motor. Its rectifier and inverter accept mains supplies ranging from 380-480 VAC, allowing direct connection to common industrial distribution networks. Operation with three-phase power balances current draw across the supply conductors, improves power factor performance, and helps limit harmonic distortion. The IP20 chassis enclosure protects against accidental finger contact with live parts, but an external cabinet must provide the required protection from dust, moisture, and other contaminants at the installation site.

Conducted emissions are attenuated by an integrated RFI Class A1/B (C1) filter, which supports installation on general-purpose low-voltage grids when motor cable lengths remain within the applicable limits. Setup and diagnostics are performed through a front-mounted Graphical Local Control Panel that displays plain-text menus, trend graphs, operating data, and alarm histories for direct access to drive settings. The internal electronics use uncoated printed circuit board assemblies, so the drive should be protected from corrosive gases, condensation, and airborne contaminants that could damage exposed circuitry. The unit has no brake chopper; applications that require rapid deceleration or control of regenerative energy must use external braking equipment or controlled ramp-down profiles.