FC-202P15KT4131F6641 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P15KT4131F6641 is part of the VLT FC 202 AQUA Drives series and delivers a power rating of 15 kW or 20 HP, operating on three phase 380 to 480 VAC mains voltage. It has an efficiency of 0.98 with an IE2 energy efficiency class and supports up to 95% relative humidity. This drive is suitable for installation at altitudes up to 1000 meters without derating and allows a maximum ambient temperature of 50 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P15KT4131F6641 variable frequency drive is manufactured by Danfoss within the VLT FC 202 AQUA Drives series. It converts fixed-frequency mains power into a regulated output that controls centrifugal pump and fan motors used in municipal water treatment, irrigation stations, and desalination plants. By synchronizing motor speed with process demand, the unit helps minimize power consumption, reduce water hammer, and extend mechanical seal life. Its variable-speed operation also allows connected equipment to respond smoothly to changing flow or pressure requirements instead of relying on continuous full-speed operation.
Its input section handles a supply range of 380 to 480 VAC delivered as three-phase power, ensuring compatibility with standard 50 or 60 Hz networks. The converter can deliver up to 21.5 kVA of apparent power, which sets the maximum current that the upstream feeder and contactors must support. Its motor output is rated at 20 HP, which corresponds to 15 kW and allows the drive to run midsized submersible or end-suction pumps. Electrical conversion losses are limited by an efficiency of 0.98, so only a small fraction of the supplied energy is lost as heat inside the enclosure. These electrical characteristics support proper selection of supply conductors, switching components, and compatible pump motors for the intended load.
Continuous operation is permitted up to 1000 m above sea level without derating, while applicable power-reduction guidelines extend operation to 3000 m. Ambient temperatures can reach 50 °C before output derating is required, and startup remains possible at temperatures as low as 0 °C. Internal power dissipation reaches 392 W under full electrical load, and this heat load should be considered when sizing cabinet ventilation. Upstream protection supports a maximum pre-fuse rating of 63 A to protect the supply circuit against excessive current. The drive can connect to shielded motor cables up to 150 m long or unshielded cables up to 300 m long without exceeding acceptable voltage-rise limits. Adequate airflow and cable routing help maintain stable semiconductor temperatures and reduce electrical interference within the installation.
