FC-202P15KT2131X9095 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P15KT2131X9095 is part of the VLT FC 202 AQUA Drives series and has a power rating of 15 kW with 20 HP output. It operates on three phase power with a mains voltage range of 200 to 240 VAC and offers a maximum output frequency of 590 Hz. The drive has an efficiency of 0.96 and supports cable lengths up to 300 meters unshielded.
Internal Product Review
The FC-202P15KT2131X9095 is a well-executed Danfoss VLT FC 202 AQUA drive rated for 15 kW and 20 HP. A 200 - 240 VAC three-phase input supports clean integration into low-voltage industrial power systems. A 590 Hz maximum output frequency and ±0.003 Hz resolution give the drive impressively precise speed control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P15KT2131X9095 is an AC variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. It converts fixed-frequency three-phase mains power into a modulated output that lets process controllers regulate centrifugal pumps and similar loads used in water supply or wastewater aeration systems. By controlling motor speed instead of relying on mechanical throttling, the drive supports energy-efficient flow adjustment and protects piping from pressure shock during ramp-up and ramp-down sequences.
This model delivers a continuous electrical output of 15 kW, which corresponds to 20 HP, when supplied from a 200–240 VAC three-phase circuit. The power section has a nominal efficiency of 0.96, so only a small fraction of input energy is dissipated as heat under typical loads. The drive supports carrier control up to 590 Hz and provides a digital resolution of ±0.003 Hz for fine pressure adjustment. The upstream branch fuse should not exceed 80 A. Dynamic braking can be added through an external resistor with a resistance of at least 8.7 Ω, and the cable disconnect terminals accommodate conductors up to 35 mm².
The assembly withstands short-circuit currents of 100,000 A RMS and maintains thermal stability at ambient temperatures up to 50 °C, with full-load operation possible down to 0 °C. Estimated internal losses reach 602 W, a value that can be used when sizing cabinet ventilation. The permitted phase imbalance at the mains terminals is limited to 3.0%. Installation without output-current derating is possible at altitudes up to 1,000 m; between 1,000 and 3,000 m, automatic derating curves apply. Motor leads may extend up to 150 m when shielded or 300 m when unshielded, and the shield connection supports proper electromagnetic compatibility. The unit meets the IE2 energy-efficiency class and carries the internal series identifier 202 within the VLT AQUA Drive product group.
