FC-202P15KT2131B9265 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-202P15KT2131B9265 is a 20 HP drive manufactured by Danfoss as part of the VLT FC 202 AQUA Drives series, designed for three phase 200 to 240 VAC power supply. It features a power rating of 15 kW, a normal overload input current of 54.0 A, and an efficiency of 0.96. The drive includes a single analog output with 8-bit resolution and a 500 ohm load, along with a digital output capable of 32 kHz frequency at 12-bit resolution.
Internal Product Review
The FC-202P15KT2131B9265 is a Danfoss VLT FC 202 AQUA drive rated for 15 kW and 20 HP. Three-phase 200 to 240 VAC input supports dependable integration in demanding pump and water system applications. With 0.96 efficiency, the drive delivers impressively efficient performance as a strong AQUA drive solution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P15KT2131B9265 variable frequency drive is manufactured by Danfoss and belongs to the VLT FC 202 AQUA Drives series. It is intended for centrifugal pumps, blowers, and other water-processing equipment where speed control supports precise flow regulation and lower energy use. By converting constant three-phase input power into variable-frequency, variable-voltage output power, the unit allows induction motors to accelerate smoothly, maintain target pressure, and decelerate without causing water hammer in automated treatment or distribution systems.
With a 208 V supply, the drive sustains a continuous apparent power of 21.4 kVA, indicating the electrical load it can supply without derating. Mechanical output is rated at 20 HP, matching the demands of medium-sized pump motors found in water facilities. Energy conversion efficiency reaches 0.96, so only a small portion of the input power is dissipated as heat. Heat dissipation is rated at 602 W, which can be considered when sizing enclosure ventilation. The permissible mains range of 200–240 VAC allows connection to standard low-voltage networks. Control resources include one 8-bit analog output that can drive a 500 Ω load and six digital inputs that accept up to 28 V DC. Two programmable digital outputs have 12-bit resolution, switch at frequencies up to 32 kHz, and source up to 40 mA, providing connections for process feedback and alarm signaling.
A maximum upstream fuse rating of 80 A is recommended to clear short-circuit events without causing nuisance trips. During normal overload conditions, the rectifier draws 54.0 A from the supply, while the inverter can deliver 59.4 A to the motor. These current values support proper cable sizing and protective-device selection. The drive provides a continuous electrical capacity of 15 kW, allowing the connected machine to operate at that load without overheating the converter. Its three-phase architecture balances current across the supply lines. Integrated analog and digital I/O allow direct connection to plant PLCs for setpoint reception, operating-status monitoring, and fault reporting.
