FC-202P11KT6134F6602 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P11KT6134F6602 is part of the VLT FC 202 AQUA Drives series and is rated at 11 kW with a 15 HP output. This three-phase power drive features an efficiency of 0.98 and supports output frequencies up to 590 Hz. It includes one analog output with a 500 ohm load, two digital outputs, and a short-circuit capacity of 100,000 RMS symmetrical amperes.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P11KT6134F6602 is a variable frequency drive manufactured by Danfoss as part of the VLT FC 202 AQUA Drives series, and it is classified in the VLT AQUA Drive product group. The unit converts fixed three-phase input power into a modulated output that lets controllers vary the speed of centrifugal pumps, blowers, or aerators used in water and wastewater treatment. By matching motor speed to real-time demand, the drive reduces energy consumption, stabilizes pressure, and limits mechanical stress throughout automated fluid-handling systems.
Continuous output power is 11 kW, which corresponds to 15 HP. The inverter can generate motor frequencies up to 590 Hz, enabling overspeed operation on correctly rated pumps. Full-load efficiency is 0.98, so only two percent of the input energy is dissipated as heat. A line-side fuse rated at 40 A limits fault current and supports coordination with Category III switchgear. The drive accepts three-phase mains power and maintains a displacement factor of 0.98 and a true power factor of 0.9, minimizing reactive demand. Parameter menus follow the Series 202 structure, and the control board provides one analog output and two digital outputs for local instrumentation.
Control and protection limits include a maximum pulse output frequency of 32 kHz for high-resolution flow metering, while the control terminal voltage must not exceed 28 V DC. The power stage withstands symmetrical fault currents up to 100,000 RMS A and tolerates supply deviations within ±10% of the nominal voltage without derating. The permitted phase imbalance is 3.0%, and the drive allows one power-up per minute to protect the charging capacitors. It complies with overvoltage Category III requirements for installation on fixed building wiring, while the analog output can drive loads down to 500 Ω and the digital outputs provide relay or transistor signaling to ancillary equipment.
