FC-202P11KT4131X6885 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P11KT4131X6885 is part of the VLT FC 202 AQUA Drives series and is designed for use with three phase power and mains voltages from 380 to 480 VAC. It features a power rating of 11 kW, 15 horsepower, and continuous output currents up to 24 A for 380-440 V operation. The drive supports operation at altitudes up to 1000 meters without derating and uses motor cables up to 150 meters shielded or 300 meters unshielded.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P11KT4131X6885 is an AC variable frequency drive engineered by Danfoss for the VLT FC 202 AQUA Drives series. Within automated pumping stations, clarifiers, and irrigation networks, the unit converts fixed mains voltage into a pulse-width-modulated output that allows controllers to match centrifugal pump speed to system pressure. This capability provides accurate flow regulation and soft starting for water-handling equipment, reducing mechanical stress on pipes and couplings. The drive can also adjust motor speed as demand changes, helping pumping systems maintain the required pressure without relying entirely on mechanical flow controls.
Electrical capability is centered on a power rating of 11 kW (15 HP) from a three-level inverter supplied by three-phase power across the 380–480 VAC mains range. At 460 V, the drive has an apparent power rating of 16.7 kVA and draws a continuous 22 A when the line voltage is between 380 and 440 V or 19 A when it reaches 480 V. The drive can deliver a continuous output current of 24 A to the motor in the lower voltage range. It can also sustain an overload current of 26.4 A for short periods, supporting pump startup or air-pocket clearing events. The integrated IGBT thermal model monitors loading during demanding duty cycles and helps prevent thermal trips while the drive regulates motor output.
A maximum pre-fuse rating of 63 A protects upstream cabling from excessive current. When the mains voltage exceeds 441 V, the output stage provides a continuous current of 21 A and an overload capability of 23.1 A. The unit operates without derating at altitudes up to 1000 m and uses proportional current reduction at elevations up to 3000 m. The ambient temperature can reach 50 °C before the controller applies thermal scaling to protect its power components. Motor leads may extend up to 150 m when shielded cable is used or 300 m with unshielded cable, allowing the drive to be positioned away from pumps in dispersed pumping galleries. These cable allowances support installations in which motors and control cabinets are separated by long equipment corridors or outdoor routing paths.
