FC-202P11KT4131F1069 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-202P11KT4131F1069 is a drive manufactured by Danfoss as part of the VLT FC 202 AQUA Drives series. It features a power rating of 11 kW, supports three phase power at 380 to 480 VAC, and delivers 15 horsepower. The drive offers an efficiency of 0.98, has a continuous output current of 24 A, and a maximum output of 16.7 kVA at 460 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P11KT4131F1069 is a variable frequency drive manufactured by Danfoss in the VLT FC 202 AQUA Drives series. As a dedicated pump and fan controller, it converts fixed mains power into a modulated output that matches flow demand in water supply, irrigation, and wastewater aeration systems. The device belongs to the VLT AQUA Drive product group and carries the internal series identifier 202. Its control functions support pressure regulation, flow control, dry-pump detection, and other fluid-handling operations. The variable-speed output can reduce unnecessary motor operation when system demand falls below its maximum level.
The inverter connects to a three-phase industrial power supply rated at 380–480 VAC and draws a continuous input current of 22 A. At the output terminals, it supplies up to 24 A and delivers 16.7 kVA of apparent power. Its motor output is rated at 11 kW for compatible induction motors. Conversion efficiency reaches 0.98, resulting in 392 W of heat loss under rated load. The drive provides a short-term overload capacity of 110% for 60 seconds, supporting rapid acceleration and transient pressure changes. Branch-circuit protection is coordinated with a 63 A prefuse. Control terminals include an analog output that can drive loads down to 500 ohms and a digital transistor output rated for 40 mA, allowing direct feedback to PLC analog inputs and compatible relay coils.
The unit carries an energy-efficiency rating of IE2 and maintains full output ratings at altitudes up to 1,000 m. It can operate in ambient humidity as high as 95% when condensation is not present. Motor leads may extend up to 150 m with shielded cable or 300 m with unshielded cable, enabling installation at pumps located away from the drive enclosure. Continuous service is permitted when the mains voltage remains within tolerance and the installation follows the grounding and electromagnetic compatibility requirements for the 202 series. The stated power loss can be used to determine the ventilation needed for the enclosure. Proper cable routing and grounding help limit electrical interference between the motor circuit and nearby control wiring.
