FC-202P11KT2131X5674 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P11KT2131X5674 is a drive from the VLT FC 202 AQUA Drives series and is rated at 11 kW with a horsepower of 15 HP. It operates on three-phase power with a mains voltage of 200 to 240 VAC and a maximum ambient temperature of 50 °C. The drive features 2 analog inputs, 1 analog output, and supports a maximum output frequency of 590 Hz.
Internal Product Review
The FC-202P11KT2131X5674 is a Danfoss VLT AQUA drive rated for 11 kW on 200–240 VAC service. Efficiency of 0.96 and three-phase power support make the unit especially appealing for stable pump and water-process duty. A 590 Hz maximum output frequency stands out as a strong performance advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P11KT2131X5674 is an AC variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. Classified in the VLT AQUA Drive product group, it connects to three-phase 200–240 V networks and adjusts motor speed to match flow requirements in pumps, blowers, and other water treatment equipment used in automated plants. The unit carries the 202 series identifier and serves as the interface between the mains supply and an induction motor, translating fixed-frequency power into a variable output.
Under nominal operating conditions, the inverter reaches an efficiency of 0.96, so only a small fraction of supplied energy is dissipated as heat. Its input stage accepts a three-phase supply within the 200–240 VAC range and, with a power rating of 11 kW, it covers medium-sized pumps typically encountered in municipal and industrial installations. The control section provides two analog inputs, one analog output, and two digital outputs for feedback, setpoint, and status exchange with external controllers. Output frequency can be adjusted up to 590 Hz, enabling high-speed motor operation when process demands increase. At nominal load, the drive draws 42.0 A of input current, while a reduced input current of 28.0 A applies at half load. The inverter output current at half load is 30.8 A.
The unit delivers 15 HP to the motor shaft when the inverter output current reaches 46.2 A under full load. Apparent power on the supply side is rated at 16.6 kVA, a value used when sizing upstream contactors and isolation transformers. The enclosure tolerates ambient temperatures up to 50 °C without derating and permits shielded motor leads up to 150 m to limit electromagnetic noise. The maximum prefuse rating is 63 A, which supports the selection of suitable protective hardware. Installation complies with the series EMC guidelines when the recommended grounding and shield terminations are used.
