FC-202P11KT2131F0955 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P11KT2131F0955 is a drive from the VLT FC 202 AQUA Drives series with a power rating of 11 kW and 15 horsepower. It operates on three phase 200 to 240 VAC mains voltage, with a continuous input current of 42.0 A and an output current of 46.2 A. This drive achieves an efficiency of 0.96 and supports maximum cable lengths of 150 m shielded and 300 m unshielded.
Internal Product Review
The FC-202P11KT2131F0955 is a Danfoss VLT FC 202 AQUA drive designed for water handling applications, rated at 15 HP and 11 kW. Three-phase 200 to 240 VAC input and 0.96 efficiency support stable operation with strong energy performance. Continuous output current of 46.2 A makes this drive a very capable choice for demanding pump control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P11KT2131F0955 is a Danfoss AC variable frequency drive in the VLT FC 202 AQUA Drives series. It conditions three-phase power and delivers a regulated output that allows centrifugal pumps or aeration blowers to follow real-time flow requirements. By adjusting motor frequency and voltage, the drive minimizes water hammer, limits energy consumption, and supplies feedback signals for modern process control platforms. Its analog status channels support integration with supervisory controllers, allowing operating data to be incorporated into plant automation loops.
The drive accepts 200–240 VAC three-phase mains and has a motor power rating of 11 kW. Under continuous loading, the line draws 42.0 A, while the inverter section can sustain 46.2 A at the motor terminals. Overall conversion efficiency reaches 0.96, which reduces the amount of heat released inside the control panel. The analog output can operate with a 500 Ω load, supporting standard monitoring circuits connected to the drive. A maximum 63 A pre-fuse protects upstream wiring against excessive fault current. The 202 product group designation identifies the drive as part of the VLT AQUA platform.
The drive provides up to 15 HP of shaft power during intermittent peaks and can deliver 50.8 A to accelerate large pump impellers when demand increases. Output pulse-width modulation is selectable up to 32 kHz, allowing reduced acoustic noise when compatible high-speed motors are used. Operation is permitted at ambient temperatures up to 50 °C at the cabinet inlet. The drive operates without altitude derating at elevations up to 1,000 m, while linear derating applies from 1,000 m to 3,000 m. Shielded motor leads may extend up to 150 m without exceeding the permitted voltage rise time. Unshielded motor leads may extend up to 300 m when the installation conditions allow their use.
