FC-202P11KS4134H6623 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P11KS4134H6623 is part of the VLT FC 202 AQUA Drives series and has a power rating of 11 kW with an efficiency of 0.96. This drive supports a horse power of 15 HP, can handle a mains voltage range of 380 to 480 VAC, and has a max continuous output current of 21 Amps at 441 to 480 V. It offers a maximum output frequency of 590 Hz and functions in temperatures up to 50 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P11KS4134H6623 is an AC variable frequency drive manufactured by Danfoss as part of the VLT FC 202 AQUA Drives series. The platform is engineered for pump and fan regulation in water and wastewater facilities, where controlled motor speed helps maintain pressure, flow, or liquid level. By modulating the supply frequency, the drive allows process controllers to match motor speed to demand. This method can reduce energy use and mechanical stress in the constant-torque and quadratic-torque applications commonly found in fluid-handling equipment.
The drive accepts a 380–480 VAC mains supply and converts it into a three-level pulse-width modulation output rated at 11 kW, which corresponds to 15 HP. Its power conversion stage operates with an efficiency of 0.96, producing approximately 440 W of heat at rated load for consideration in panel ventilation. Output frequency is adjustable up to 590 Hz, providing a broad speed-control range for compatible motors. The input section can carry 41 A, while the inverter continuously supplies 21 A to the motor. At 460 V, the output has an apparent power of 16.7 kVA. An analog 0/4–20 mA channel accepts proportional feedback or process signals, and the power terminals accommodate conductors with cross-sectional areas up to 35 mm².
The unit maintains full output at ambient temperatures up to 50 °C and at elevations up to 1000 m without derating. It is configured for single-phase input power, allowing connection to an appropriate supply when the required voltage and current are available. The upstream fuse or circuit breaker must not exceed 80 A to provide suitable overcurrent protection. Shielded motor leads may extend up to 150 m, supporting installations where pumps or fans are located away from the control panel. Unshielded motor leads may reach 300 m when the installation permits that cable arrangement. The drive also provides power-terminal capacity suitable for the stated conductor size, while its analog input supports common current-based transmitters used for pressure, flow, and level control.
