FC-202N450T7135U2917 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202N450T7135U2917 is a drive from the VLT FC 202 AQUA Drives series with a rated power of 450 kW and 600 horsepower. It is designed for three phase power and supports a maximum output frequency of 590 Hz with a maximum output voltage matching the supply voltage. The drive operates in ambient temperatures up to 50 °C and allows motor cable lengths up to 150 meters shielded or 300 meters unshielded.
Internal Product Review
The FC-202N450T7135U2917 is a Danfoss VLT FC 202 AQUA drive built for demanding water applications, with 450 kW output and three-phase power. Efficient electrical performance stands out through a displacement power factor above 0.98 and a true power factor of at least 0.9. Installation flexibility is a key advantage, with support for 150 m shielded motor cable and 300 m unshielded motor cable.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202N450T7135U2917 is a variable frequency drive produced by Danfoss within the VLT FC 202 AQUA Drives series. This drive belongs to the VLT AQUA Drive product group and is designed to control the speed of large-frame induction motors in municipal water, irrigation, and wastewater treatment systems. By converting fixed three-phase mains power into regulated output power, it improves pump efficiency and helps prevent pressure shocks. Integrated analog and digital I/O also allow the drive to exchange process feedback and control signals with plant PLCs.
Rated continuous output reaches 450 kW, equivalent to 600 hp, giving the unit sufficient capacity for high-flow pumping stations. The inverter can produce frequencies up to 590 Hz while maintaining an output terminal voltage equal to 100% of the supply voltage, allowing it to operate compatible high-speed motors without flux loss. Power factor correction keeps the displacement power factor above 0.98 and the true power factor at or above 0.9, reducing reactive current on the supply side. Analog feedback channels have a maximum error of 0.8%, use a 12-bit converter, and can drive loads up to 500 Ω. Digital outputs can switch at frequencies as high as 32 kHz. A minimum brake resistance of 2.0 Ω can dissipate regenerative energy during rapid deceleration, while the three-phase input keeps the DC link charged.
The drive can operate at ambient temperatures up to 50 °C without derating and at relative humidity levels up to 95% without condensation. Motor leads can use shielded cable with a maximum length of 150 m or unshielded cable with a maximum length of 300 m. These cable allowances permit the inverter to remain in a dry control room while connected submersible pumps operate in a pit. Logic terminals provide a sourcing capability of 40 mA, allowing the controller to energize compatible indicator lamps or interface relays directly. This sourcing capability can reduce the need for separate low-current switching components in the control circuit.
