FC-202N250T7134H3313
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-202N250T7134H3313 is part of the AQUA drive series from Danfoss Automation. It is has a power rating of 25 Kilowatts and belongs to the IP20 protection category. The converter is also a three phase device that is designed to be used at an ambient temperature that falls between -10 to about 45 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202N250T7134H3313 is credited to be one of the most energy-efficient and high-performing converter designs available for use in industrial and commercial applications. It is an aqua drive that leverages new-generation technological advancement to provide operators with accurate motion control for water and wastewater applications. The operational features of his product include cascade control, dry-run detection, motor alternation, Safe Torque Off, and low-fluid detection during operation. The drive is also able to support motors from different manufacturers without any reduction in operation standards.
The environment where the FC-202N250T7134H3313 converter is used plays a significant role in its performance standards; operators are required to use the converter in relatively close proximity to the motor it controls; also, the installation height of the converter should be maintained below 1000 meters to ensure operating without derating. The self-cooling ability of the frequency drive can easily prevent any malfunction that may be caused by heat. Above 1000 meters, that is, a lower air pressure, the cooling ability of the frequency drive is affected. In such a situation, the maximum output current should be reduced or the ambient temperature lowered.
The FC-202N250T7134H3313 maximum output current of this variable frequency drive is 40 milliamperes. This is the highest amount of electrical current the frequency drive can supply to external circuits. Using this converter to control the flow or pressure of any system is guaranteed to improve operation efficiency. The drive converter will also automatically adjust the speed of fans or pumps to meet the system's pressure conditions. The highest resistance that can be connected to the frequency drive output without compromising the drive's operation is about one kilohm. Any resistance below this can lead to overloading the drive.
Frequently Asked Questions about FC-202N250T7134H3313:
Q: Is there an RFI filter in the FC-202N250T7134H3313 converter?
A: Yes. This converter features an integrated EMC filter. The filter helps to reduce electrical interference in the device.
Q: Is the FC-202N250T7134H3313 a three phase device?
A: Yes. There are three electrical connection phases on this product.
Q: What is the best mounting position for the FC-202N250T7134H3313 motor?
A: The FC-202N250T7134H3313 should not be mounted at an height that exceeds 1000 meters. Also special care should be taken to protect the drive from extreme ambient temperatures.
Q: How long is the service life of this product?
A: Under normal operating conditions, the FC-202N250T7134H3313 can be used for more than five years without problem.
Q: Can the FC-202N250T7134H3313 be used in residential areas?
A: It is possible to use this converter in residential areas, however additional mains interference filters will be necessary.
