FC-202N200T7134H1812 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-202N200T7134H1812 drive is manufactured by Danfoss as part of the VLT FC 202 AQUA Drives series and supports a rated power of 200 kW for three phase power. It has a minimum brake resistor of 4.2 ohms and a brake average power of 16 kW. The drive operates with a maximum ambient temperature of 50 °C and can be used at altitudes up to 3000 meters with derating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202N200T7134H1812 is a variable-frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. In municipal or industrial pump stations, the drive modulates motor speed to match hydraulic demand, improving energy use and lowering mechanical stress on centrifugal equipment. The design belongs to the VLT AQUA Drive product group and interfaces directly with three-phase mains, allowing integration into automated filtration, irrigation, and wastewater processes that require constant torque regulation and soft starting.
The unit supplies a continuous output of 200 kW and accepts three-phase power, so it can run large induction motors without external transformers. Dynamic braking is accommodated by an internal chopper rated for 16.000 kW of average dissipation, provided that the external resistor network remains above 4.2 Ω and is wired with 25 mm² (4 AWG) conductors. A nominal resistor value of 5.8 Ω and a 57 A thermal relay protect the circuit during extended deceleration. Electromagnetic compatibility is supported by the integrated RFI Class A1/B (C1) filter, which keeps conducted emissions within Category C1 limits for sensitive instrumentation.
The drive can operate at full load in ambient temperatures starting at 0 °C, while reduced-load operation is permitted down to −10 °C. The maximum ambient temperature is 50 °C before derating is required. It can be mounted at elevations up to 1,000 m without an output reduction and remains functional with reduced current at elevations up to 3,000 m. Shielded motor leads may extend up to 150 m, while unshielded leads may extend up to 300 m, allowing the drive to support remotely installed pumps. The housing withstands vibration of 1.0 g, which is relevant for skid-mounted booster sets and rooftop cooling towers exposed to resonance or transportation shocks.
