FC-202N200T4134F0372 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202N200T4134F0372 is a VLT FC 202 AQUA Drives series product designed for three phase power and is rated for 200 kW of power. The drive features an enclosure rating of IP20 and supports a mains voltage of 380 to 480 VAC. It measures 1122 mm in height, 350 mm in width, 375 mm in depth, and weighs 125 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202N200T4134F0372 is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. Intended for pump and fan duties in water and wastewater treatment, the unit adjusts motor speed so that flow matches process demand while reducing unnecessary energy use. It can regulate large centrifugal machines continuously and connect with industrial automation systems that monitor operating conditions, issue speed commands, and coordinate process equipment.
During operation, the drive can deliver up to 200 kW in normal-overload service, while its heavy-overload capability is 160 kW. Its apparent power rating is 274 kVA, representing the maximum volt-ampere load presented to the supply. The input section accepts 380 - 480 VAC three-phase power, covering the standard low-voltage range used in process plants. Output frequency is adjustable up to 590 Hz, allowing overspeed operation when the motor and system hydraulics permit it. Conducted emissions meet RFI Class A2 (C3), helping the converter satisfy applicable electromagnetic compatibility requirements in industrial installations. Because the drive does not include a brake chopper, an external braking solution is required when the application needs rapid deceleration. The drive uses the D4H frame, and its printed circuit boards have a Class 3C3 conformal coating that resists moisture and aggressive airborne contaminants.
An upstream protection device rated no higher than 550 A should be installed to match the converter’s maximum input fuse value. The enclosure has an IP20 chassis rating, making it suitable for protected installation inside an appropriate ventilated electrical cabinet. The unit measures 1122 mm high, 350 mm wide, and 375 mm deep, so the cabinet must provide adequate mounting space, ventilation clearance, and cable access around the D4H frame. Its weight is 125 kg, and suitable lifting equipment should be used during handling and installation. The Series Identifier 202 distinguishes its product line, while the chassis dimensions support installation planning for high-power water and wastewater applications.
