FC-202N160T7134G8271 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202N160T7134G8271 is part of the VLT FC 202 AQUA Drives series and offers a rated power of 160 kW with a rated horsepower of 225 hp. This drive operates with three phase power and features an 8-bit analog output resolution. It provides a displacement power factor greater than 0.98 and is designed for a maximum digital input voltage of 28 V DC.
Internal Product Review
The FC-202N160T7134G8271 is a Danfoss VLT AQUA drive built for demanding industrial pumping and fluid-handling systems, with a 160 kW rating and three-phase power input. A true power factor of at least 0.9 and displacement power factor above 0.98 support efficient, stable electrical performance. The 100000 RMS symmetrical A short-circuit rating is a standout specification for critical installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202N160T7134G8271 from Danfoss belongs to the VLT FC 202 AQUA Drives series. It is an AC variable-frequency drive intended for pump and fan applications in water-handling facilities, where adjusting motor speed can save energy and reduce hydraulic stress. By regulating the frequency and voltage delivered to induction motors, the unit can maintain constant pressure or flow while reducing unnecessary electrical consumption. The drive is suitable for municipal water systems, commercial facilities, and industrial fluid-processing applications that require controlled motor operation under changing demand.
Its continuous output rating reaches 160 kW, allowing the drive to control large centrifugal pumps without external gearboxes. The input section is designed for three-phase power, so it connects directly to 380–480 V mains commonly found in process plants. A displacement power factor of >0.98 keeps reactive current low and eases transformer loading, while the true power factor remains at or above 0.9 under nominal operating conditions. Protection against electrical faults is reinforced by a short-circuit withstand rating of 100,000 RMS symmetrical A and compliance with Overvoltage Category III. The recommended braking resistor values are 7.2 Ω nominal, 6.1 Ω preferred, and 4.2 Ω minimum, providing suitable resistance options for dissipating regenerated energy during rapid motor deceleration.
The drive permits a maximum line imbalance of 3.0%, helping protect the DC link from thermal cycling when phase voltages differ. Its control terminals accept logic signals up to 28 V DC, supporting connections to compatible control and interlock circuits. The transistorized relay can source 40 mA for status indication or external interlocking. An analog output channel provides 8-bit resolution for proportional feedback to remote meters and other connected control devices. This output operates with loads up to 500 Ω, allowing the feedback signal to be transmitted without exceeding the channel’s supported load. The separate digital and analog limits allow control signals, status outputs, and process feedback to operate within their appropriate electrical ranges.
