FC-202N132T7134H1811 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202N132T7134H1811 is part of the VLT FC 202 AQUA Drives series and has a power rating of 132 kW with a supply voltage range of 525 to 690 V AC for three phase power. This drive offers 4 digital inputs, 2 digital outputs, and 1 analog output with a range of 0/4 to 20 mA at 8-bit resolution. It includes an RFI filter rated at Class A1/B (C1) and can handle a maximum analog load of 500 Ohms.
Internal Product Review
The FC-202N132T7134H1811 is a Danfoss VLT AQUA Drive with a 132 kW power rating and 525–690 V AC supply. Three-phase power and RFI Class A1/B (C1) filtering give the drive clean integration and dependable operation in plant environments. A very capable option for high-demand AQUA drive service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202N132T7134H1811 is a variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. The unit modulates a three-phase mains supply to regulate induction motor speed in water supply, irrigation, and wastewater treatment systems. It includes pump-oriented functions for applications that require constant pressure or controlled flow. The drive can adjust motor operation as process demand changes, reducing unnecessary output when a pump or blower does not need to run at full speed.
It operates from a supply of 525–690 V AC and uses three-phase power, enabling direct connection to a compatible industrial power system. The drive provides a continuous shaft power rating of 132 kW, making it suitable for large pump or blower installations. One analog output provides a process signal selectable between 0/4–20 mA. This output has an 8-bit resolution and can transmit proportional feedback, such as flow or level data, to an external controller. Four digital inputs are included and can be expanded to six, while two digital outputs provide status signaling or relay control. The control terminals accept 0–24 V DC logic, and the input stage tolerates surges up to 28 V DC without damage.
The analog channel can drive connected field devices with a load of up to 500 Ω and can source as much as 40 mA. This capacity supports signal transmission to equipment such as valve positioners or chart recorders over appropriately installed cable runs. Pulse-train functions operate at frequencies up to 32 kHz, providing high-frequency signaling for compatible control equipment. Integrated electromagnetic interference suppression meets RFI Class A1/B (C1) limits, reducing the need for additional external filtering in qualifying installations. An internal phase-loss monitor protects the power components when an incoming phase is interrupted. Thermal monitoring of the IGBTs coordinates switching behavior with operating load and temperature conditions to protect the drive during continuous service.
