FC-202N132T4134F4108 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202N132T4134F4108 is part of the VLT FC 202 AQUA Drives series and offers a rated power of 132 kW with a maximum horsepower of 175 hp. Designed for three phase power and operating at 380 to 480 VAC, it supports up to 95% humidity and ambient temperatures up to 50 °C. This drive features one analog output, a digital output current of 40 mA, and an energy efficiency class of IE2.
Internal Product Review
The FC-202N132T4134F4108 is a Danfoss VLT AQUA drive rated for 132 kW on 380 - 480 VAC mains. IE2 energy efficiency and operation up to 50 °C support dependable performance in demanding water and wastewater service. A strong choice for high-capacity installations requiring efficient, stable drive control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202N132T4134F4108 is a variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It belongs to the VLT AQUA Drive product group for pump and fan regulation in water-handling installations. The unit converts fixed-frequency three-phase mains power into a controlled output waveform so centrifugal pumps can modulate flow, reduce water hammer, and minimize energy consumption in municipal or industrial automation systems.
At full load, the drive supplies 132 kW when fed from a 380–480 VAC utility supply. Built for three-phase power, it needs no additional phase-conditioning hardware. Continuous operation is permitted from 0 °C up to 50 °C, matching typical mechanical room conditions. The design meets the IE2 energy-efficiency class commonly required for pumping equipment. The control section offers one analog output and multiple digital channels. Its relay output can switch 40 mA for status lamps, while the analog channel delivers pressure or flow feedback to a PLC. Protective algorithms maintain torque during voltage dips and provide smooth acceleration to help extend pipe life.
The drive runs at full current at altitudes up to 1000 m and can operate at altitudes up to 3000 m with staged derating. Relative humidity can reach 95% under noncondensing conditions without internal heaters. The analog output stage drives loads as low as 500 Ω, allowing direct wiring to panel meters. Six programmable digital inputs tolerate signals up to 28 V DC, simplifying integration with 24 V control circuits. Motor leads may extend up to 150 m when shielded or 300 m when unshielded, allowing pump motors to be positioned far from the control vault while remaining within electromagnetic compatibility and voltage-drop limits.
