FC-202N110T4134F4168 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202N110T4134F4168 is part of the VLT FC 202 AQUA Drives series. It delivers a power rating of 110 kW or 150 HP and operates on three phase power at a supply voltage range of 380 to 480 VAC. The drive features a max output frequency of 590 Hz, supports true power factor of at least 0.9, and offers 150 percent high overload torque for 1 minute.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202N110T4134F4168 is an AC variable frequency drive manufactured by Danfoss as part of the VLT FC 202 AQUA Drives series. The model belongs to the VLT AQUA Drive product group and is intended for flow-dependent applications such as centrifugal pumps, aerators, and blowers in water and wastewater automation. By converting fixed-frequency mains power into a regulated output waveform, it matches motor speed to the required duty point, reducing energy consumption and mechanical wear in fluid-handling installations.
The converter accepts three-phase mains power at 380–480 VAC and can provide output voltage up to the full input voltage. Continuous output power is 110 kW, equivalent to 150 HP, making the drive suitable for large pump stations. The control electronics synchronize with 50 or 60 Hz networks and modulate the inverter so that the motor frequency can reach 590 Hz. Acceleration and deceleration profiles can be extended to 3600 seconds to limit hydraulic shock. Normal overload operation provides 110% torque for one minute. The true power factor is at least 0.9, and the unit accommodates a supply-frequency variation of +4% to -6% on utility grids. The design tolerates a 3.0% phase imbalance under the permitted operating conditions. Its insulation complies with overvoltage category III requirements for permanently wired industrial equipment.
In high-overload mode, the drive has a one-minute torque rating of 150/160%, providing additional headroom during valve startup or backwash cycles. Short-circuit endurance is rated at 100,000 RMS A, which accommodates common industrial fault-current levels when the required upstream protection is installed. The input voltage may deviate by ±10% from its nominal value without exceeding the permitted supply range. The displacement power factor remains above 0.98, limiting reactive current drawn from the electrical supply. Series identifier 202 identifies the model within the Danfoss pump-control drive range, while its three-phase power topology supports standard industrial motor connections.
