FC-202N110T4134F0367 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202N110T4134F0367 is a drive from the VLT FC 202 AQUA Drives series with a power rating of 110 kW and a maximum output frequency of 32 kHz. It operates on three-phase power with a mains voltage of 380 to 480 VAC and supports up to 150 HP. The drive offers one analog output with 8-bit resolution and a maximum ambient temperature of 50°C.
Internal Product Review
The FC-202N110T4134F0367 is a Danfoss VLT AQUA drive with a 110 kW rating and 380 to 480 VAC mains capability. Three-phase power architecture and 150 HP capacity support confident deployment in demanding pump and fan applications. Excellent output flexibility is reinforced by a 32 kHz maximum output frequency, making the unit a strong choice for smooth and efficient variable speed control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202N110T4134F0367 is an AC variable frequency drive manufactured by Danfoss and supplied under the VLT FC 202 AQUA Drives series. Designed to regulate pump and fan speed in water and wastewater facilities, it converts fixed-frequency mains power into a controllable output that matches flow demand. By adjusting motor frequency and torque, the unit helps reduce energy consumption and water hammer in process loops.
Rated output power reaches 110 kW, or approximately 150 HP, so the drive can start and regulate large centrifugal pumps without external soft starters. It accepts a supply of 380 – 480 VAC from a three-phase power network and uses insulated-gate transistors to produce carrier frequencies up to 32 kHz. Fine speed increments are supported because the pulse generator provides 12-bit frequency output resolution. Motor cables may be installed at lengths up to 150 m when shielded or 300 m when unshielded, providing routing flexibility in large treatment plants. A brake resistor with a minimum resistance of 3.6 Ω can dissipate regenerative energy during rapid valve closures. The analog output channel supplies up to 40 mA, allowing connection to compatible process-control equipment for real-time feedback and monitoring.
The control layer integrates one analog output with 8-bit resolution, an accuracy of 0.8% FS, and a default load impedance of 500 Ω. Two digital or pulse outputs share the terminal block with six logic inputs that tolerate 28 V DC, permitting direct connections to common float switches and flow meters. Continuous operation is allowed at ambient temperatures up to 50 °C, while operation at altitudes up to 1000 m does not require derating. The drive uses Series Identifier 202 and belongs to the VLT AQUA Drive product group.
