135N5847
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-202PK25T2E55H1XGXXOXSXXXXAXBXCXXXXDX
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The 135N5847 drive has a continuous output current of 6.6 A, an efficiency of 98%, a typical shaft output power of 1.1 kW, and an estimated power loss of 44 W at rated load. Part of the VLT FC 202 AQUA Drives series by Danfoss, it features a maximum cable cross-section of 16 mm² and a protection rating of IP55/Type 12.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 135N5847 is a VLT® AQUA Drive from Danfoss’s FC 202 series designed for water and wastewater treatment applications. This variable frequency drive controls motor speed for pumps, blowers and mixers in municipal water systems, sewage treatment facilities and industrial water processing. The drive is designed to optimize pump performance by matching motor speed to actual system demand, reducing energy consumption and mechanical stress on pumping equipment. Its design addresses the unique requirements of water treatment environments where reliability and efficiency means public health and environmental protection. This means consistent operation in demanding aquatic processing facilities where continuous pump operation is critical.
The 135N5847 has a continuous output current of 6.6 A and delivers up to 98% efficiency during normal operation. It has a typical shaft output power of 1.1 kW and is suitable for medium duty pump applications in water treatment. Power loss is minimal at 44 W at rated load. This means high efficiency, less heat and longer component life. This ensures lower electrical consumption over extended operation, enhancing the sustainability of the system. This energy optimization is especially valuable in water treatment where pumps run continuously.
The 135N5847 has a cable installation with a maximum cross section of 16 mm². for flexible wiring configurations. Its IP55 protection rating means that it provides reliable operation even in harsh industrial environments. It is fully protected against dust and water jets from any direction. This makes it suitable for outdoor installation and operation in humid conditions found in water treatment facilities. The drive is designed to withstand moisture, temperature fluctuations and corrosive atmospheres found in aquatic processing environments. This results in longer system life and less maintenance requirements.
Frequently Asked Questions about 135N5847:
Q: What continuous output current does the 135N5847 provide?
A: The 135N5847 operates with a continuous output current of 6.6 A for medium-duty pump applications.
Q: What efficiency level does the 135N5847 achieve?
A: The 135N5847 achieves exceptional efficiency levels of 98% during normal operation conditions, minimizing heat generation and energy consumption.
Q: What shaft output power does the 135N5847 deliver?
A: The 135N5847 delivers a typical shaft output power of 1.1 kW for water treatment pump applications, supporting medium-duty pumping operations.
Q: What are the power losses of the 135N5847 at rated load?
A: The 135N5847 maintains estimated power loss of just 44 W at rated load conditions, contributing to overall system energy savings.
Q: What cable cross-section does the 135N5847 support?
A: The 135N5847 accommodates cable installations with a maximum cross-section of 16 mm² for flexible wiring configurations.
