131Z0876
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-202P4K0T4E55H2XGX3SXSXXXXAXBXCXXXXDX
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships in 3 Days
The Danfoss 131Z0876 drive from the VLT FC 202 AQUA Drives series has a power rating of 4.0 kW / 5.0 HP and operates on three-phase mains voltage of 380 - 480 VAC. It includes an IP55/Type 12 enclosure, a graphical Local Control Panel, and an integrated RFI filter. The drive's net weight is 10.93 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
This Danfoss 131Z0876 aqua drive is an adjustable frequency drive. The drive features a dangerous voltage when it is connected to the line power. This product’s faulty connection can result in its damage. The device is intended to be provided with correct protective grounding. This unit’s voltage inputs are to be checked for proper disconnection before beginning any repair work. Its nameplate data is based on a typical three-phase line power supply. The drive supports some special applications that affect its electrical ratings.
This product’s supporting motor can be started or stopped using digital or bus commands when the drive has an active line power connection. The device’s disposal is not allowed with domestic waste. This unit has no coated PCB or brake chopper. Its identification label shows the options supported by the drive. The drive supports cooling by air circulation. This product is mounted in a through panel to reduce the panel depth. The device’s panel through mount kit can’t be put to use with cast front covers. This unit’s ground connection cable should have at least a 0.016 in² cross-section. Its AC line voltage should correspond to the rating specified on the nameplate.
The aqua drive supports usage with sine-wave filters to cut down the acoustic noise from the filter. This product’s control terminals can be accessed only if the front cover is removed. The device may encounter ground loops in rare cases if the control cables are very long. This unit’s Quick Menu button can be used to set its parameters. It is primarily used in submersible pumps.
Frequently Asked Questions about 131Z0876:
Q: When does the 131Z0876 drive enter into an alarm mode?
A: The 131Z0876 drive enter into an alarm mode when there is an unsuccessful AMA.
Q: How should the setup of the 131Z0876 drive be done?
A: The setup of the 131Z0876 drive should be done in the order highlighted on its display.
Q: What is the OK button of the 131Z0876 drive used for?
A: The OK button of the 131Z0876 drive is used to select a parameter and/or activate the change made to a parameter.
Q: Where are the parameter settings of the 131Z0876 drive stored?
A: The parameter settings of the 131Z0876 drive are stored in the graphical local control panel or on a PC using the MCT 10 setup software.
Q: How is the 131Z0876 drive connected to a PC?
A: The 131Z0876 drive is connected to a PC using a USB cable or its RS-485 interface.
