176F7307 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss 176F7307 is part of the VLT Adjustable Micro Drives series and has a rated power of 0.75 kW. This drive supports single-phase 230 VAC supply voltage, features an IP20 enclosure, and weighs 2.0 pounds. It provides a continuous output current of 5.0 Amps and supports a maximum motor cable length of 330 feet with a maximum cable size of 14 AWG.
Internal Product Review
The 176F7307 is a Danfoss VLT adjustable micro drive rated for 0.75 kW on a 230 VAC supply. IP20 enclosure protection and 5.0 A continuous output current make the unit well suited for compact panel installations with steady motor control. A 7.5 A intermittent output current adds useful overload capability, making this model a strong choice for light industrial drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 176F7307 belongs to the VLT Adjustable Micro Drives series produced by Danfoss. This single-axis AC inverter converts fixed mains power into a variable-frequency output that allows induction-motor speed to be regulated without mechanical throttles. Within an automation line, the device sits between a fractional-kilowatt motor and the plant PLC, delivering ramp control, fault monitoring, and motor protection in a palm-sized module. It is intended for conveyors, small pumps, and fan applications where energy savings and compact packaging are priorities.
The drive accepts a single-phase mains feed at 230 VAC, delivers a continuous 5.0 A to the motor, and tolerates momentary overloads up to 7.5 A during acceleration. Continuous operation corresponds to a shaft output of 0.75 kW, while the inverter has an apparent power limit of 1.9 kVA, leaving capacity for reactive current drawn by induction motors. Temperature-controlled algorithms supervise the current and reduce the switching frequency when necessary. A photocoupler transistor can source 50 mA for remote status lamps, and one programmable analog input accepts either a 0–10 V or 4–20 mA speed reference. Six digital inputs handle start, stop, and preset commands. The unit weighs 2.0 lb, which eases DIN-rail mounting inside compact panels.
A finger-safe IP20 enclosure requires the inverter to be housed inside a control cabinet while allowing toolless access to its terminals. Feeder conductors accommodate a maximum input draw of 11.5 A, and the branch circuit is protected by a 20 A prefuse that coordinates with the 5 kA short-circuit withstand rating. Motor leads up to 330 ft long may be used when 14 AWG conductors are selected to keep voltage drop and reflected-wave stress within acceptable limits. The enclosure must provide adequate space for wiring and airflow around the drive. Proper conductor routing also helps separate motor output wiring from low-level analog and digital control signals, reducing the likelihood of electrical interference. The cabinet arrangement should preserve access to the terminals and protective devices during routine inspection.
