176F7304 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss 176F7304 is part of the VLT Adjustable Micro Drives series and supports three-phase input and output with a continuous output current of 5.0 Amps. This drive features an IP20 enclosure rating, has a peak starting torque of 200 percent for 5 seconds, and offers 1.9 kVA output power. Its maximum motor cable length is 330 feet and it weighs 1.75 pounds.
Internal Product Review
The 176F7304 is a Danfoss VLT adjustable micro drive with 3-phase input and 0.75 kW shaft output. A continuous output current of 5.0 A and 200% peak starting torque for 5 sec support stable motor response during demanding starts. IP20 enclosure protection and 6 programmable digital inputs make this unit a strong choice for compact drive control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 176F7304 is a variable frequency drive manufactured by Danfoss as part of the VLT Adjustable Micro Drives series. It is designed to control motor speed in light-duty industrial automation applications such as small conveyors, fans, and pump skids. By rectifying and inverting incoming power, the unit supplies controlled frequency and voltage to the connected induction motor. This operation allows smoother acceleration, reduced inrush current, and energy savings within compact control panels.
The drive connects to a three-phase mains supply and draws a maximum input current of 6.3 A under full load. On the output side, it provides a continuous current of 5.0 A and can deliver up to 7.5 A during short overloads. It supplies 1.9 kVA to the motor terminals. During startup, it can produce 200% of rated torque for 5 seconds, eliminating the need for a mechanical soft starter. This electrical capacity corresponds to a rated motor output of 0.75 kW when the drive is paired with a compatible motor. Upstream protection is provided by a 20 A time-delay fuse, and the inverter circuitry withstands fault currents up to 5,000 A. A balanced three-phase output waveform is programmed through six digital inputs that support run commands, speed selection, and fault reset.
The enclosure carries an IP20 rating, permitting installation inside standard switchgear without additional finger guards. Motor leads up to 14 AWG can be clamped to the power terminal block. The terminal screws can be tightened to 4 kg-cm to maintain secure connections under vibration. A maximum cable run of 330 ft is supported before supplemental output filters are recommended, providing flexibility when the drive is panel-mounted away from the motor. With a mass of only 1.75 lb, the unit can be secured to DIN-rail or backplate hardware without adding substantial weight to the enclosure.
