176F7302 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss 176F7302 is a variable frequency drive from the VLT Adjustable Micro Drives series. It features a continuous output current of 7.0 A at a nominal input voltage of 230 V, and is housed in an IP20 enclosure. The drive is rated for 1.5 kW power, supports single-phase input, and has a weight of 2.25 pounds.
Internal Product Review
The 176F7302 is a Danfoss VLT adjustable micro drive designed for single-phase 230 V input. Rated at 1.5 kW with 7.0 A continuous output current, the unit delivers stable control for compact motor applications. An IP20 enclosure and six digital inputs make this drive a strong choice for clean panel integration and practical machine interfacing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 176F7302 is a variable frequency drive supplied by Danfoss as part of its VLT Adjustable Micro Drives series. Intended for small-frame machines, the unit converts fixed-frequency mains power into a controlled output that allows precise motor-speed adjustment without mechanical dampers. It supports motors up to 2.0 HP, making it suitable for light conveyors, compact pump skids, and ventilation systems that require basic speed control. The control electronics, power stage, and operator keys are integrated into one enclosure, reducing the required cabinet space and simplifying connections between the drive and motor. Its compact design also supports installation in machines where available panel space is limited.
The power section accepts a single-phase supply at 230 V, drawing up to 15.7 A and delivering a continuous output current of 7.0 A. During short loading peaks, the inverter can supply 10.5 A, providing additional torque as the connected motor accelerates. The silicon bridge and pulse-width modulation stage convert the incoming power into an apparent output of 2.7 kVA. The heat sink manages thermal energy produced by the power electronics during continuous operation. Adequate ventilation around the enclosure helps prevent excessive internal temperatures when the drive operates under sustained load. Output conductors should be selected and routed to limit voltage drop and reduce electrical interference near sensitive control wiring.
The open-style IP20 enclosure is intended for clean switchboards installed at elevations no higher than 1000 m. Upstream line protection should use a fuse rated at 25 A, coordinated with the drive’s short-circuit withstand rating of 5000 A. Motor conductors as large as 14 AWG can be connected to the output terminals. Six digital inputs allow external switches, sensors, or control devices to send operating commands to the inverter. A single relay output can communicate drive status or fault conditions to other equipment in the control system. With a weight of 2.25 lb, the unit places little load on light-gauge back panels and can be positioned conveniently within compact electrical enclosures. Proper spacing around the drive allows access to its terminals and operator controls while maintaining the airflow needed for cooling.
