176F7301 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss 176F7301 is part of the VLT Adjustable Micro Drives series and has a nominal input voltage of 230 V. It offers a typical shaft output of 0.75 kW, with a continuous output current of 5.0 A and can handle a max input current of 11.5 A. The drive features six digital inputs, a relay output, and comes in an IP20 rated enclosure.
Internal Product Review
The 176F7301 is a Danfoss VLT adjustable micro drive rated for 230 V input and 0.75 kW typical shaft output. IP20 enclosure protection and 6 digital inputs support clean panel integration and flexible machine control. Continuous output current of 5.0 A gives the drive steady performance for compact motor applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 176F7301 is a compact AC variable frequency drive manufactured by Danfoss for the VLT Adjustable Micro Drives series. It accepts single-phase mains power and delivers a modulated three-phase output that controls motor speed in small conveyors, fans, and pump modules used throughout industrial automation. The unit fits inside control panels with minimal clearance and provides basic process control through onboard logic terminals and fieldbus-ready connectors.
The drive connects to a single-phase supply of 230 V, drawing a continuous line current of 5.0 A while supplying up to 1.9 kVA to the motor terminals. For short acceleration periods, it can deliver 7.5 A without exceeding its thermal limits. The drive supports a typical mechanical shaft output of 0.75 kW. Six digital inputs allow start, stop, speed selection, and fault reset commands to be issued directly from limit switches or PLC transistor outputs. The built-in control algorithm automatically adjusts the output frequency to maintain torque as the load changes. Because the power section is designed for a single-phase supply, the unit can operate in locations where three-phase electrical service is unavailable.
The housing carries an IP20 rating that prevents accidental finger contact while permitting convection cooling inside the cabinet. Peak line demand is limited to 11.5 A, and a 20 A upstream fuse provides suitable circuit protection. The drive has a short-circuit withstand rating of 5000 A, which supports coordination with upstream circuit breakers. One relay output, rated at 2.5 A at 240 VAC, can signal operating status or alarms to external contactors. Control cables up to 14 AWG, or 2.0 mm², fit the screw terminals, while the 2.0 lb assembly keeps the load on the mounting rail low. The drive can operate at elevations up to 1000 m above sea level without derating.
