VLT 8102 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss VLT 8102, part of the VLT 8000 Aqua Drives series, delivers a typical shaft output of 75 kW/100 HP and boasts an efficiency of 98%. This drive provides an output power of 102 kVA at 400V and 104 kVA at 460V. It features IP 20/NEMA 1 or IP 54/NEMA 12 enclosure protection and weighs up to 77 kg.
Internal Product Review
The VLT 8102 Frequency Converter from Danfoss delivers reliable motor control with a starting torque of 110 %. It features a 0–120 Hz frequency range, high power factor efficiency, and eight fast-response digital inputs. Its overload capacity reaches up to 130 % breakaway torque for challenging start-up conditions.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VLT 8102 Frequency Converter is designed to provide a reliable efficient solution for controlling the speed and performance of motors. It is capable of controlling a wide range of motor types with varied voltage and frequency parameters. This device offers flexibility in operation with precise control over power delivery.
The VLT 8102 frequency converter operates within a wide voltage range and offers an output voltage of 0 – 100 % of the supply voltage. It also accommodates a frequency range from 0 to 120 Hz. The device supports a high true power factor of 0.90 at rated load and has a displacement factor near unity (greater than 0.98) that ensures efficient energy consumption. The frequency converter features an allowable on/off switching sequence of approximately 1 time per 2 minutes and a maximum short circuit current of 100 kA for strong protection against electrical faults. It is also equipped with eight programmable digital inputs that operate with a voltage level of 0 - 24 V DC with positive logic signals and an input resistance of around 2 kΩ. The scanning time per input is approximately 3 ms that ensures fast response times. The control card of this converter operates on a 24 V DC supply with a maximum load of 200 mA and a designated ground connection for added safety.
The VLT 8102 frequency converter from Danfoss delivers a starting torque of 110 % for one minute and can provide a high break away torque that reaches up to 130 % for 0.5 seconds. This ensures efficient motor start up even under load. The acceleration and overload torque are set at 100 % and 110 %, respectively.
