178B2176
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT8006AT4C20STR3DLF00A00C0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The Danfoss 178B2176 drive, part of the VLT 8000 Aqua Drives series, operates with a power rating of 0.75 kW (1 HP) and supports 3-phase 380-480 V AC ±10% input voltage. It has an output frequency range of 0-1000 Hz, integrated braking unit, and IP20 enclosure. The unit is short-circuit proof.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 178B2176 is a compact and extremely flexible converter manufactured by Danfoss Automation to operate in servo systems and provide accurate motion control. This converter is flexible in operation and can be easily mounted by well-trained personnel. The front panel of this product features a control unit made up of a display unit and a keyboard through which operators can modify the operation of the product using specific configuration parameters. Although this unit does not produce a high degree of heat or noise during operation, it comes with an air blower and heat sink which operates together to maintain a cool internal environment. The installation position of this product should also allow for easy movement of cool air around the product unit.
The 178B2176 frequency converter contains about 8 programmable digital inputs, the voltage level at this input is between 0 to 24 volts, while the input resistance is estimated to be approximately 2 kiloohms. There are also three programmable analogue inputs, and 2 programmable pulse inputs present on this product. The typical output current supplied from this product to connected motors is 10 amperes; however, this can reach a maximum value of 11 amperes for an intermittent duration of 60 seconds. The output power of motors connected to this product is 7.2 kilovolt ampere, and the typical shaft output is estimated to be about 4 kilowatts.
The 178B2176 frequency converter belongs to the IP20 protection category and maintains a high efficiency level of about 96 percent. The input current of this product is about 9.1 amperes. At maximum load, a power loss of about 198 watts is recorded on this product. All cables used for the wiring of this product should meet international quality standards.
Frequently Asked Questions about 178B2176:
Q: What is the best installation position for this product?
A: The 178B2176 is n IP20 device that should be installed indoors in a control cabinet where ambient temperature does not exceed 45 degrees.
Q: Can the 178B2176 be used in a polluted area?
A: Polluted air can lead to the accumulation of dust which can reduce the efficiency of heat regulation. The 178B2176 should be used a clean environment.
Q: Can multiple units of this product be used together?
A: It is possible to install multiple unit of this product together. However, a constant supply of cool air must be maintained.
Q: Can the control cables and motor cables be installed together?
A: No. The control cables used with the 178B2176 should be installed separately from the motor cable to avoid interface over coupling.
Q: Is the 178B2176 an environmentally friendly product?
A: Yes. The proper handling of the 178B2176 has no negative effect on the environment.
