178B0561 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The 178B0561 is a compact HVAC drive with an IP54 enclosure class. Manufactured by Danfoss, this drive belongs to the VLT 6000 HVAC Drives series and operates on three-phase mains voltage of 380-480V ±10% at 50/60Hz. It features a local control panel display, supports LonWorks fieldbus options, and weighs 43.6 kilograms.
Internal Product Review
The 178B0561 drive supports 10 display languages. Its four parameter setups can be programmed independent of each other. The drive has a lock setting to prevent unauthorized data modification of its parameters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
This 178B0561 HVAC drive by Danfoss needs a screwdriver for operating its red switches. The drive’s RFI switch must be in the ON position for compliance with EMC standards. The product is connected with large-sized motors using a delta connection. The device-related control cables are meant to be fitted with cable clamps at both ends for good electrical contact. This unit needs an LC filter at its output if no phase coil insulation is present in the motor. Its motor cable screen is to be connected to the metal cabinets of the drive plus motor. The drive’s earthing has to abide by the applicable local and national regulations.
This product’s DC bus terminal can be used for DC backup. The device’s high-voltage relay cable should be connected to its 01, 02, and 03 terminals. This unit’s protective cover is removable with a screwdriver or a similar pointed object. It has four DIP switches. The drive incorporates a parallel connection when more than one drive has been connected to a single master. This product’s analog current input has a rating of 0 A or 4 mA to 20 mA. The device-associated control cable has a maximum cross-section of 16 AWG. This unit’s local control panel has ALARM, ON, and WARNING indicator lamps. Its parameter setups can be modified through the control panel if the lock function is not activated.
The HVAC drive’s local control is carried out using the keys below the indicator lamps. This product incorporates four display modes. The device supports manual initialization to its factory settings. This unit’s Quick Menu highlights the 12 most important setup parameters. Its display supports 10 languages.
