176F7082 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: VLT6100GT4C00STR0DLF00A00C0
The 176F7082 HVAC drive is manufactured by Danfoss and is part of the VLT 6000 HVAC Drives series. This standard unit operates at 380-460 VAC, comes with an LCP display, and is housed in a compact IP00 enclosure. It features no RFI filter or conformal coating.
Internal Product Review
The 176F7082 is a Danfoss VLT 6000 HVAC drive built as a standard unit for 380-460 VAC systems. The local control panel simplifies setup, and the compact IP 00 enclosure fits well in protected panel installations. A well-executed drive option for dependable HVAC control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 176F7082 is an AC drive produced by Danfoss within the VLT 6000 HVAC Drives series. The unit modulates the speed of induction motors so ventilation, pumping, and air-handling equipment can match thermal demand without relying on mechanical dampers or throttling valves. By varying output frequency and voltage, the drive reduces energy consumption and provides smoother motor starts that can extend the service life of belts and bearings in building automation systems.
Electrical compatibility covers supply networks from 380–460 VAC, allowing the drive to operate on common 50 or 60 Hz plant feeders without an autotransformer. Operation and parameter entry are handled through a front-mounted LCP (Local Control Panel), which provides direct access to setpoints, operating data, and fault history. The electronics reside in a compact IP00 housing, so the chassis requires installation inside a protected cabinet with suitable airflow and safeguards against accidental contact. The power stage is supplied without an integrated filter, which means external radio-frequency interference suppression may be required when conducted emissions must be controlled. The control board uses a standard unit configuration, with no dedicated input/output expansions or sensor boards installed at the factory.
Demand-driven supply fans configured with the Graham application template can use preconfigured speed references, start and stop logic, and proportional-integral-derivative control loops for the intended operating profile. The drive includes no optional modules, so the terminal set remains in its basic arrangement and requires fewer auxiliary connections during installation. The unit is manufactured without a protective coating, making cabinet humidity control important where the electronics may be exposed to moisture or corrosive airborne contaminants. A suitable enclosure should limit condensation, dust accumulation, and direct contact with water while maintaining the airflow needed to cool the open chassis. External fieldbus gateways may be connected through the available control interfaces when communication with a building management or supervisory control system is required.
